My Orders
51014 (ABICSER) LG Refrigerator - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$15.00
In Stock
Handle Screw
Part #MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.
Read less
$51.61
In Stock
Guide Rail - Right Side
Part #MEA40002601
This is an authentic OEM part sourced directly from the manufacturer. The crisper slide rail for your refrigerator allows the crisper drawer to slide in and out, and supports the drawer as it does so. This part is for the right side of your crisper drawer. Please note that the roller for this guide rail is a separate part under part number PS11759956.
$84.91
In Stock
Door Basket
Part #MAN61844401
This genuine OEM door basket, also known as a bin, rack, or tray, offers additional storage on your refrigerator door for items like bottles, jars, and condiments. It is white and designed to be mounted on the inside of the door. You should replace the basket when it becomes damaged or cracked as it may no longer securely hold items, whic...Read moreh could potentially lead to spills when you open the door. It is important to keep in mind that this basket is sold individually, so it is advisable to check how many you will need based on your refrigerator model.
Read less
No Longer Available
$15.00
In Stock
$127.64
In Stock
Water Inlet Valve Assembly
Part #5221JA2006D
This water inlet valve has three solenoid valves and push in fittings. When energized this part releases water from the supply line into the ice mold.
No Longer Available
$51.61
In Stock
$101.29
In Stock
$31.58
In Stock
$34.74
In Stock
No Longer Available
Water Filter
Part #5231JA2002A
Filters water without removing minerals that are of value to your health, such as fluoride. Lessens the presence of iron, dirt, and rust, among other impurities. This filter needs to be replaced every six months or 500 gallons. It measures 5.6 inches high and 3.3 inches in diameter. To replace, first remove the old filter, which can be ac...Read morecessed by removing the top shelf. Pull it down and turn counter-clockwise to remove. Take your new filter and check to make sure the tabs are in the horizontal position. Now push it into the compartment and rotate it until it is secure. To remove trapped air, run 2.5 gallons of water through the system in cycles of 30 seconds on and 60 second off. If your model has an indicator on the display, push and hold the Filter or Reset button for about 5 seconds to reset.
Read less
Exact Part matches for your search term
$8.22
Special Order
Common Symptoms of the 51014
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator Fan Squeeking
17 of 21 people
found this instruction helpful.
Detected noise as coming from top freezer department, and tips and part diagram clearly pointed to evaporator fan. You go in through the freezer (you have to empty top half of freezer); removing the side rails holding the ice bin, and then the 4 outer screws (only 2 each side - not the middle ones) holding the 'auger' that turns the bin
... Read more
. From there it gets interesting in trying to disconnect the wires. You might consider taking some pictures of the connected wires - perhaps it doesn't matter, but several of them can be hooked up in reverse. After the ice marker is out, remove light and light cover, side rails/mounts that hold hold up ice maker. This leaves a large white cover that pops out (seam at bottom of it has two tabs that you can pop out) holding the fan; and then only a few more wires to disconnect to be able to get at the fan. Mine clearly had a wobble to it confirming the source of the squeak and need to replace. Install was just reverse -- a bit tricky to get some of the wires connected given the tight spaces. Overall, not difficult - but a lot of wires and screws to connect/disconnect. I didn't take any pictures as I disassembled, and found myself having to take some extra time to figure it out as I reassembled. In the end -- a silent and functioning refrigerator Good luck!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Brocken rails
3 of 4 people
found this instruction helpful.
Very easy to replace right and left rail 3 screws on each side
Other Parts Used:
Was this helpful?
Thank you for voting!