4686 - Overview

This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This is a genuine manufacturer approved replacement ground drive idler pulley designed for lawn tractors. The purpose of this pulley is to apply tension to the belt. It is made out of plastic with metal and it is sold individually.

The Mandrell Assembly, or Jackshaft Housing Assembly includes the housing, shaft assembly, bearing, and nut. It will require a screw driver, pliers, socket set and wrench set to install, and its installation is rated as "Easy". This silver, metal assembly is used to secure the mower's deck and is driven by a belt which turns the cutting b...Read morelade underneath. It attaches on the deck of the mower. If broken, damaged or worn it should be replaced. You'll know if this is the case if there is a stretching sound, grinding sound, or vibration. Refer to your make, model and diagrams to ensure this is the correct part.

Genuine OEM replacement Blade, this item is sold individually. This Blade is used on the Lawn Tractor models shown below. Most of the Lawn Tractors listed below will use 3 of these blades. It would be a good idea to purchase 3 extra blades so when your blades on the Tractor need sharpening, you can use your extras.

This is a genuine Murray replacement part, it is sold individually. The 091334MA Bushing /Bearing is installed in the front wheel of the Murray Lawn Tractors shown below. There are two of the parts per wheel. One is installed on the outside of the wheel the other is installed on the inside of the wheel. Once they are installed the wheel, it can be positioned on to the left or right spindle assembly.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

The Blade Nut is a 9/16-18" silver, metal nut. This part is sold individually, and requires a wrench and socket to install. Its installation is rated "Easy". This part secures the blade in place and attaches onto the blade shaft. If broken (likely due to fatigue) it may come loose and rattle, causing vibrations. Refer to your make, model and diagrams to ensure this is the correct part.