4684 - Overview

This replacement ignitor assembly is a genuine Broil-Mate part. It is specially sourced from original equipment manufacturer for use with gas grills. Igniter makes ignition process simple and safe by producing the spark to ignite the burner with only a push of a button. It has a plastic body and it is sold individually. Please note, it do...Read morees require a "AAA" battery which is sold separately. Replacing this ignitor is an easy task that does not require any tools. • Unplug the wires from the old ignition module • Unscrew the button that holds it to the unit • Place a new module in place • Install a "AAA" battery and secure the module with the button • Re-connect the wires

This is a genuine OEM part that is compatible with Broil-Mate, Broil King, and Huntington grills. It is an identical replacement for a damaged or a missing component that was included with a new unit. This is the bottom cap for the right side door. Refer to the owner's manual for the correct application. Note, this high-quality component ...Read moreis made of durable plastic and is sold as an individual item. Replacing it is a simple task that does not require any special tools.

This replacement electronic ignitor is specially designed use with for Broil-Mate gas grills. It is supplied directly from original equipment manufacturer. This part has a plastic body and it is sold individually. Igniter produces the spark to ignite the burner. It requires a "AAA" battery which is sold separately. Replacing this electro...Read morenic ignition module is easy and does not require any tools • Disconnect the wires from the old module • Unscrew the button that holds it to the unit • Place a new module in place • Install the battery and secure the module with the button • Re-connect the wires

This is an OEM part sourced directly from the manufacturer. The spring is designed for use in grills from Broil King, Broil-Mate, Huntington, and Sterling. This part is made of metal, and is placed to provide tension to the control cover. You may require a screwdriver when replacing this part. This item is sold individually.

It is a genuine item that is supplied by the original manufacturer for use with Broil King, Broil-Mate and Huntington grills. This is an identical replacement for a damaged or a missing top right side door end cap that was installed on a new unit. The part includes a magnet that helps to keep the door shut. Make sure to refer to the appro...Read morepriate diagram for your model to ensure the exact location and the correct repair procedure. Replacing it is a simple task that should not require any special tools. Keep in mind the other door caps are all sold separately.

10 1/2" x 23"

This genuine OEM supplied replacement part is designed to fit Sanitaire upright vacuums. Spinning motion of this brush help to pick up dust and debris. Over time bristles on rotating floor brush will wear down requiring replacement. This part is made out of plastic and it is sold individually. To complete this repair your would need a sc...Read morerewdriver. • Make sure the unit is unplugged • Lower handle to floor • Remove three screws to remove the hood/cover • Lift left end of brush roll • Remove and discard old brush roll • Place new brush roll around motor shaft • Place belt around brush roll pulley • Align left end cap with base and push it securely into place • Push right end cap into base until it snaps into place • Rotate brush roll by hand two full rotations to properly position belt • Re-assemble and test the unit