46810001 (2015) Weber Grill - Overview

This is an authentic Weber replacement part that is sourced from the original manufacturer to be used with outdoor gas grills. The metal panel is used at the bottom of the frame assembly to support the propane tank. This item is available as an individual replacement part, please see illustrated diagram for related products.

A burner with uneven flames or poor heating may have a dirty, damaged, or incorrectly placed burner cap. This black cap covers a high-output burner head and helps guide the flame outward for steady heat. First, let the cooktop cool and remove any grease or food blocking the burner openings. Dry every surface completely and reseat the cap ...Read morebefore testing. Replacement may be needed if the cap is chipped, bent, corroded, or no longer rests evenly. Match the new cap to the appliance model and burner location because similar caps can differ. Stop using the cooktop and shut off the gas supply if you detect a gas odor.

This stainless steel fixed side table adds convenient prep and storage space to your grill setup. Featuring a durable stainless steel surface with sleek plastic trim, it provides a sturdy area for marinating, cutting, or holding plates and utensils. The table can be mounted on either the left or right side of your grill, and installation ...Read moreis simple with the included hardware—just attach and secure for a more organized grilling experience.

This rear panel forms part of the appliance enclosure, protecting internal components while providing structural support. Built for durability, it helps maintain overall stability.

Connect the grill hose and regulator to the main gas line with this bulkhead assembly for select gas grills. It includes a metal connector, mounting bracket, screw, and washer. Replace it if the connector is corroded, damaged, or leaking. Turn off the gas supply before repair. Have all connections checked for leaks before using the grill. Confirm fit with the exact model number.

This is a manufacturer sourced replacement thermometer designed for use with Weber grills. It can be used to measure temperature inside the grill and the temperature of the food. This part is made out metal and it is sold individually. Wingnut is included. Dial reads 150 - 600 degrees.

This black front cabinet door assembly is designed to restore both function and appearance to a gas grill by replacing doors that are damaged, rusted, or bent. Constructed from durable metal, the door helps protect internal components from weather and debris while maintaining a clean, finished look. Finished in black to match the original...Read more grill design, the assembly includes the door panel and mounting hardware needed for installation, allowing for a straightforward replacement that refreshes the grill cabinet and supports long-term durability.

This is a genuine Weber replacement part that is sourced from original equipment manufacturer for use on gas grills. It is a high quality part that is secured to the nozzle of the propane tank to supply fuel to the burners. This assembly includes the metal regulator with a plastic knob and the durable rubber hose with a brass fitting. To replace this part you will need an adjustable wrench.

These are authentic manufacturer-sourced replacement parts that are supplied for use with Weber grills. This is the hardware kit which is used to secure the burner tubes and grease tray rails, please make sure to check appropriate diagrams of your model for correct application. This item includes four high-quality metal screws, keep in mi...Read morend you will need a wrench or a flat-head screwdriver to install or remove the hardware.