466347017 Char-Broil Grill - Overview

Restore proper flame and even cooking heat with this replacement main burner tube. The stainless steel tube mixes gas with air and spreads the flame along the cooking area. Replace a worn burner if the grill heats poorly or shows uneven flames. Close the fuel valve and disconnect the gas source before installation. Use the exact model number to confirm fit.

Restore proper burner ignition with this replacement crossover tube. It helps pass gas and flame between nearby burners so each burner lights correctly. A worn or damaged tube may cause slow or uneven ignition. Close the fuel valve and disconnect the gas source before installation. Use the exact model number to confirm fit.

Grease buildup below the cooking area can create a mess and increase the chance of flare ups. A fitted catch pan collects grease, food pieces, and other drippings under the grill. Replace a damaged pan before using the grill. Allow all surfaces to cool before installation. Use the exact model number to confirm fit.

This stainless-steel heat tent, also referred to as a heat plate, is specifically designed for various gas grills. Heat tents serve the purpose of providing cover for burners, safeguarding them and preventing food residues from direct contact, while ensuring even distribution of heat for consistent grilling. It is crucial to promptly repl...Read moreace rusted or damaged heat tents to prevent grease fires and to achieve proper and uniform food cooking. Heat tents differ from burner tubes as they distribute heat rather than producing flame. This particular heat tent is constructed from durable stainless steel and measures approximately 17 inches in length and 2.5 inches in width. Grill components like heat tents are susceptible to rusting, so it is advisable to protect your grill adequately to extend their lifespan. The heat tent is sold as an individual part and does not include any additional components. During the replacement of your heat tent, it is recommended to inspect other grill parts for rust, corrosion, or damage, in case additional replacements are needed. Replacing all of your heat tents at the same time is generally a good idea, as it is likely they have rusted or become damaged at a similar rate. Replacing the heat tent(s) is a simple process: open the grill while it is turned off, lift out the old heat tent, and place the new heat tent inside.

This gas grill valve, hose, and regulator assembly is a pre-assembled replacement unit designed to control and regulate the flow of gas from the propane tank to the grill’s burners. It is intended for use with select gas grill models and is ideal for restoring performance in grills experiencing inconsistent heating or ignition issues. The...Read more integrated design simplifies installation and ensures a secure connection between components. This part helps maintain safe and efficient gas flow, supporting reliable ignition and consistent burner output. Before installation, always disconnect the gas supply and verify your grill’s model number to ensure compatibility.

This burner brace is a replacement support component designed to stabilize and position a burner assembly securely. It helps maintain proper alignment and is commonly replaced when bent, warped, or damaged by heat or wear.

This is an authentic Char-Broil replacement part manufactured for use with outdoor grills. The electronic ignition module creates an electric charge that is sent to the electrode that creates an electric arc to ignite the fuel in the burners. The electronic ignition requires one AA battery (not included), and it is sold individually.

This replacement wheel is specially manufactured for use on Char-Broil grills. It is an authentic OEM sourced item, not an aftermarket imitation. This wheel keeps the grill stable and mobile for easy transportation. It is made from durable black plastic and it is sold individually. Please note the hardware and the axle to secure this wheel are all sold separately.