466252314 Char-Broil Grill - Overview

This is a Genuine Manufacturer Approved replacement part for use in Char-Broil Grills. This Trough helps to transfer heat to the food. Trough has extended supports on the front and back sides. This part is made out of Metal and it is Sold Individually. No special tools are required to attach this Trough

This is a genuine OEM sourced replacement part designed for use with Char-Broil grills. The position of openings on the burner help to create an even flame across the cooking area. Depending on model of your grill it may have three (3) or four (4) of these burners. It is made out of stainless steel and it is sold individually.

This is an Authentic OEM replacement part designed for Char-Broil Grills. This part has a Plastic Body and it is Sold Individually. Ignition Module produces the spark to ignite the burner. It has Two (2) Inputs and Four (4) output connectors. Requires an AA battery (not included). Replacing this Electronic Ignition Module is easy and doe...Read mores not require any additional tools • Unplug the wires from the old Ignition Module • Unscrew the Button that holds it to the unit • Place a New Module in place • Install a AA Battery and Secure the Module with the Button • Connect the wires

It is an authentic OEM part which is specially designed for Char-Broil grills. The electrode provides a spark that arcs to the main burner to ignite the gas. If the burner won't light, first clean the electrode and check that it's aligned. If the problem persists, replace the igniter electrode. This item will provide an identical replacem...Read moreent for the original part that was installed on a new unit. Refer to the diagrams of your model for the correct installation of this component. Note, one durable ceramic electrode with an attached wire is included. Replacing it is a simple task that only requires a screwdriver.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.

This is an authentic replacement part manufactured for use with Char-Broil outdoor grills. The rubber bumpers are used with the side burner lid to prevent damage to the self or lid. This rubber bumper is available as an individual replacement part.

This replacement batter cap is an authentic OEM item specially designed for Char-Broil grills. It is use to secure the battery in the electronic ignition module. Please note one durable plastic cap with a metal spring is included per order.

This is an authentic Char-Broil replacement part. The handle end is designed by the manufacturer for use in gas grills. This part is made of metal, and is placed on the lid to provide a seat at either end of the lid handle. You may require a screwdriver or wrench when replacing this part. This item is sold individually.