466224411 Char-Broil Grill - Overview

This is a genuine OEM replacement part for a Char-Broil Outdoor Stove. The grease tray is designed to catch grease drippings from food as it cooks. Before replacing this part make sure the stove is completely cooled down to avoid any possible injury. This part is made of metal with a grey powder coat finish. It is a separately sold replacement part.

This replacement part is specially designed for use with Char-Broil grills. It is an authentic OEM item, not an aftermarket equivalent. This carryover tube is used to carry the flame from one burner to another as well as supporting for the burners themselves. Over time tubes tend to rust in combination of heat and moisture requiring repla...Read morecement. Please note, this stainless steel tube is sold individually. This assembly includes two cotter pins to secure the carryover tube.

This original Char-Broil replacement parts is designed for use with gas grills. The purpose of a heat diffuser is to direct grease and drippings away from the burner tubes, which cuts down on flare ups tremendously. An extra benefit of these diffusers is that they help to add that "cooked on a grill" flavor to your food. Tents tend to rus...Read moret is the combination of heat and moisture and should be replaced if they are damaged or lost. This item is made out of steel with porcelain coating and it is sold individually.

It is an authentic OEM part which is specially designed for Char-Broil grills. The electrode provides a spark that arcs to the main burner to ignite the gas. If the burner won't light, first clean the electrode and check that it's aligned. If the problem persists, replace the igniter electrode. This item will provide an identical replacem...Read moreent for the original part that was installed on a new unit. Refer to the diagrams of your model for the correct installation of this component. Note, one durable ceramic electrode with an attached wire is included. Replacing it is a simple task that only requires a screwdriver.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.

This is an authentic replacement part manufactured for use with Char-Broil outdoor grills. The rubber bumpers are used with the side burner lid to prevent damage to the self or lid. This rubber bumper is available as an individual replacement part.

This replacement batter cap is an authentic OEM item specially designed for Char-Broil grills. It is use to secure the battery in the electronic ignition module. Please note one durable plastic cap with a metal spring is included per order.