This is an individual plastic wheel compatible with various models of outdoor grills. This wheel attaches to an axle rod at the bottom of the grill assembly, allowing you to move it around. If you find your grill difficult to move and notice that the wheel(s) do not rotate or move smoothly due to damage or warping, you will need to replac...Read moree this wheel. Consider ordering multiple wheels if you find that more than one is not moving properly. This wheel measures approximately 6 inches in diameter and has a 1 1/16-inch outer diameter and 3/8-inch inner diameter bearing. To replace this wheel, you only need to remove the pin that secures it to the axle rod. Then, you can slide off the old wheel and install and secure the new wheel in place.
This cooking grate is a genuine Weber replacement part that is specially manufactured for use with gas grills. It used to support the food over the burners providing for the best grilling experience. It is advised to clean it after each use to prevent rusting which normally is caused by the heat and moisture from the left over food. This cooking grate made from durable metal and it is sold individually.
This is a genuine OEM supplied component which is specially made for use with Char-Broil grills. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this pal nut. This part provides an identical replacement for a mis...Read moresing or a faulty component that was included with a new unit. Keep in mind this high-quality nut is made of durable metal and is sold individually.
The is an original Char-Broil replacement part manufactured for use with outdoor grills. This warming rack attaches to the sides of the lid and fire box. The warming rack pivots when the lid is raised. For grills with two racks, this is the lower of the two and is sold individually.