463269011 Char-Broil Grill - Overview

Genuine Char-Broil replacement part, this item is sold individually. It includes the igniter and two 26

This genuine manufacturer sourced replacement part is specially designed for Char-Broil grills. Igniter is the part that produces the spark to ignite the burner. Features 2 input terminals and two (2) output-connector on the back for the ignition switch. Requires a AA battery (not included). Replacing this electronic ignition module is ...Read moreeasy and does not require any tools • Unplug the wires from the old ignition module • Remove old igniter and replace it with a new one from the kit • Unscrew the button that holds module to the unit • Secure new module in place • Install a battery and secure the module with the button • Connect the wires and test the unit

This is a genuine OEM replacement part for a Char-Broil Outdoor Stove. The grease tray is designed to catch grease drippings from food as it cooks. Before replacing this part make sure the stove is completely cooled down to avoid any possible injury. This part is made of metal with a grey powder coat finish. It is a separately sold replacement part.

This is a genuine manufacturer sourced replacement parts designed for use with Char-Broil gas grills. The purpose of a heat tent is to direct grease and drippings away from the burner tubes. This will greatly cut down on flare ups. Tents will normally begin to rust due to the combination of heat and moisture. This item is made out of steel with porcelain coating and it is sold individually.

This is an authentic manufacturer-supplied replacement part that is specially made for Char-Broil grills. The carry-over tube provides support for the burners and carries the flame from one burner tube to the next. Over time due to a combination of heat and moisture tubes may begin to rust or warp eventually requiring replacements. One hi...Read moregh-quality stainless steel carry-over tube with two clips to secure it are included. Check the diagrams of your model for the exact location and the correct installation of this component. You may require pliers to remove and secure the clips that secure the flame carryover tube.

This is a genuine Char-Broil replacement part, sourced from the original manufacturer for use with outdoor grills. The bumper is silicone rubber, and used on the main lid. This bumper protects the lid and burner box from damage when closing the lid. The bumper is sold individually.

It is an authentic OEM part which is specially designed for Char-Broil grills. The electrode provides a spark that arcs to the main burner to ignite the gas. If the burner won't light, first clean the electrode and check that it's aligned. If the problem persists, replace the igniter electrode. This item will provide an identical replacem...Read moreent for the original part that was installed on a new unit. Refer to the diagrams of your model for the correct installation of this component. Note, one durable ceramic electrode with an attached wire is included. Replacing it is a simple task that only requires a screwdriver.

This is an authentic replacement part manufactured for use with Char-Broil outdoor grills. The rubber bumpers are used with the side burner lid to prevent damage to the self or lid. This rubber bumper is available as an individual replacement part.

This replacement batter cap is an authentic OEM item specially designed for Char-Broil grills. It is use to secure the battery in the electronic ignition module. Please note one durable plastic cap with a metal spring is included per order.

This is a high-quality OEM component which is designed for use with Char-Broil infrared grills. Char-Broil's commercial series infrared grills feature a patented cooking grid and infrared emitter tray which radiates and transmits heat to grill food without exposure to flame. If the part is heavily rusted or damaged it needs to be replaced...Read more. This is the emitter tray only designed to be paired with a cast iron cooking grate which is sold separately. Note, this durable stainless steel emitter is sold individually. Replacing it is a simple task that does not require any tools.