463262812 Char-Broil Grill - Overview

This stainless steel cleaning tool is an OEM part sourced directly from Char-Broil. This tool was designed to scrape off cooked on food or grease from the grates of the grills listed below. Using this tool to maintain the cleanliness of the grill will extend the life of the grates. One item is included per order.

This is a genuine Char-Broil replacement part, it is sold individually. This is the part of the Grill that the flame is coming from on your Gas Grill. Depending on your grill you may have 3 or 4 of these. To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided. The front of t...Read morehe burner will connect to the Electrode W/ Wire/Collector. They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled. This part includes one threaded pin and one cotter pins.

This is an authentic OEM replacement part that is supplied directly from Char-Broil for use with a gas grill. The knob is used to control the temperature and intensity of the flame. This part does not require any tools simply connects to the burner valve. This part is made of chrome and plastic and is sold separately.

Introducing a key addition to your grilling arsenal; the Char-Broil Grease Tray. This essential component is designed specifically to capture the grease that drips from food, ensuring a clean and efficient grilling process. To get the most from your Char-Broil Gas Grill, it's crucial to replace the grease tray as needed for the best cooki...Read moreng results. Benefits of this product include hassle-free cleaning and a safer grilling experience. Always remember to wait until the grill has cooled off before installing the grease tray. Add this to your Char-Broil grill today for a smoother, better grilling experience.

This replacement part is specially designed for use with Char-Broil grills. It is an authentic OEM item, not an aftermarket equivalent. This carryover tube is used to carry the flame from one burner to another as well as supporting for the burners themselves. Over time tubes tend to rust in combination of heat and moisture requiring repla...Read morecement. Please note, this stainless steel tube is sold individually. This assembly includes two cotter pins to secure the carryover tube.

Discover the reliability and convenience of the Char-Broil Electronic Ignition Module designed for gas grills. It plays an essential role in the function of your grill by supplying power to the igniters, allowing for an easy and quick start to your barbecuing. To enhance the longevity of your grill and experience the best performance, thi...Read mores ignition module is a must-have. Not only it ensures efficient operation, but also it enhances the safety and durability of your grill. Remember to wear work gloves for your safety during the installation. Upgrade your grilling today with this essential Char-Broil component.

This is a genuine Char-Broil replacement part, sourced from the original manufacturer for use with outdoor grills. The bumper is silicone rubber, and used on the main lid. This bumper protects the lid and burner box from damage when closing the lid. The bumper is sold individually.

This item is a genuine Char-Broil replacement part that is intended to be used with outdoor gas grills. The metal rail attaches to the bottom side of the firebox and is used to mount the grease tray to catch food drippings. The left rail is priced as a single replacement part.

This is an authentic Char-Broil replacement part that has been sourced from the original manufacturer to be used with infrared gas grills. The metal cooking grates fit into the fire box and are used to support the food being cooked above the burners. This item is available as an individual replacement.

An authentic manufacturer-sourced item that is specially designed for use with Char-Broil grills. This is one of the rails used to support the grease tray. It is a high-quality component which is made of durable metal and it is sold individually, please note the hardware to secure it is sold separately.

It is an authentic OEM part which is specially designed for Char-Broil grills. The electrode provides a spark that arcs to the main burner to ignite the gas. If the burner won't light, first clean the electrode and check that it's aligned. If the problem persists, replace the igniter electrode. This item will provide an identical replacem...Read moreent for the original part that was installed on a new unit. Refer to the diagrams of your model for the correct installation of this component. Note, one durable ceramic electrode with an attached wire is included. Replacing it is a simple task that only requires a screwdriver.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.