463261709 Char-Broil Grill - Overview

Genuine Char-Broil replacement part, this item is sold individually. It includes the igniter and two 26

This is a genuine Char-Broil replacement part, it is sold individually. This is the part of the Grill that the flame is coming from on your Gas Grill. Depending on your grill you may have 3 or 4 of these. To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided. The front of t...Read morehe burner will connect to the Electrode W/ Wire/Collector. They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled. This part includes one threaded pin and one cotter pins.

This genuine Char-Broil replacement flame tamer is designed to help your grill perform at its best. Sold individually, this part serves two important functions: it evenly diffuses heat from the burners below to ensure consistent cooking, and it acts as a barrier to prevent grease and food particles from clogging or damaging the burners. ...Read more Made from durable materials and built to match original specifications, this flame tamer helps extend the life of your grill while improving heat distribution and reducing flare-ups. Whether you're replacing a worn part or upgrading your grill’s performance, this OEM component is a smart and simple solution.

This is a genuine OEM replacement part for a Char-Broil Outdoor Stove. The grease tray is designed to catch grease drippings from food as it cooks. Before replacing this part make sure the stove is completely cooled down to avoid any possible injury. This part is made of metal with a grey powder coat finish. It is a separately sold replacement part.

This is an authentic OEM replacement part that is supplied directly from Char-Broil for use with a gas grill. The knob is used to control the temperature and intensity of the flame. This part does not require any tools simply connects to the burner valve. This part is made of chrome and plastic and is sold separately.

Fashioned exclusively for Char-Broil gas grills, this Electronic Ignition Module plays a vital role in your grilling operations. It acts as a dependable power supply to the igniters, enabling them to promptly light the burners. This guarantees an efficient and effortless start to your cooking process. Due to the nature of its function, it...Read more is recommended that it is installed with the usage of work gloves to ensure your safety. With this module, you can trust that your Char-Broil grill continues to perform to its high standards. This item is key to maintaining a consistent and powerful barbecue experience.

This is an authentic manufacturer-supplied replacement part that is specially made for Char-Broil grills. The carry-over tube provides support for the burners and carries the flame from one burner tube to the next. Over time due to a combination of heat and moisture tubes may begin to rust or warp eventually requiring replacements. One hi...Read moregh-quality stainless steel carry-over tube with two clips to secure it are included. Check the diagrams of your model for the exact location and the correct installation of this component. You may require pliers to remove and secure the clips that secure the flame carryover tube.

This is a genuine Char-Broil replacement part, sourced from the original manufacturer for use with outdoor grills. The bumper is silicone rubber, and used on the main lid. This bumper protects the lid and burner box from damage when closing the lid. The bumper is sold individually.

This item is a genuine Char-Broil replacement part that is intended to be used with outdoor gas grills. The metal rail attaches to the bottom side of the firebox and is used to mount the grease tray to catch food drippings. The left rail is priced as a single replacement part.

An authentic manufacturer-sourced item that is specially designed for use with Char-Broil grills. This is one of the rails used to support the grease tray. It is a high-quality component which is made of durable metal and it is sold individually, please note the hardware to secure it is sold separately.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.

The sideburner burner goes next to the sideburner. It is an authentic OEM sourced item which is specially produced for use with Char-Broil grills. This item is available as an individual replacement part. A screwdriver may be helpful when replacing this item. This part may become broken and will need to be replaced.