463248208 Char-Broil Grill - Overview

This genuine Char-Broil replacement flame tamer is designed to help your grill perform at its best. Sold individually, this part serves two important functions: it evenly diffuses heat from the burners below to ensure consistent cooking, and it acts as a barrier to prevent grease and food particles from clogging or damaging the burners. ...Read more Made from durable materials and built to match original specifications, this flame tamer helps extend the life of your grill while improving heat distribution and reducing flare-ups. Whether you're replacing a worn part or upgrading your grill’s performance, this OEM component is a smart and simple solution.

Genuine Char-Broil replacement part, this item is sold individually. This part is placed directly beneath the 3482121 Cooking Grate. Its purpose is to stop flame flareups on your food and distribute the heat evenly. It is made of stainless steel and measures 18-5/16" Long x 7-5/8 Wide x 1-1/4" thick.

This is a Genuine Manufacturer Approved Control Knob used on Char-Broil Gas Grills. It helps to control your Burners. This part is made out of Plastic and it is Sold Individually. Replacing this part does not require any tools, this Knob fits over the Regulator Shaft. Please note Bezel is Sold Separately.

Dimensions 17 Inches Long 7-1/2 Inches Wide Genuine Char-Broil replacement part, this item is sold individually. This the part of the Grill that that food is grilled on. It used in conjunction with the 3485532 Cooking Grate Housing. It is made of stainless steel.

This is a genuine Char-Broil replacement part. it is sold individually. The burners are the part of the grill that the flame rises from. This burner is equipt with spider guards. The Burners flame is controlled by the control knobs that are attached to the Valve/Manifold/Regulator. It is a good idea to keep these clean and covered as they have a tendency to rust and corrode. Includes wire mesh spider guards.

This thermometer/ temperature gauge is a genuine manufacturer sourced replacement part. It is specially designed for use with Char-Broil grills. It can be used to measure temperature inside the grill. This part is made out metal and it is sold individually. It does include a wingnut that helps to secure it to the unit. Dial reads 150 - 650 degrees. No tools would be needed to replace this item.

This is a Genuine Manufacturer Approved replacement part designed for Char-Broil Grills. This item is made out of Metal and it is Sold Individually. The Carryover tube provides support burners, and carries the flame from one burner to the next. They also help keep the burners securely in place. Over time, your carryover tubes may rust or warp. This would be the time to replace them.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.

This replacement button is a genuine OEM supplied item that is specially produced for Char-Broil grills. It is used to secure the battery in the electronic ignition module. Please note this item includes one black plastic button with a metal spring.