463247310 Char-Broil Grill - Overview

Genuine Char-Broil replacement part, this item is sold individually. It includes the igniter and two 26

This is a genuine Char-Broil replacement part, it is sold individually. This is the part of the Grill that the flame is coming from on your Gas Grill. Depending on your grill you may have 3 or 4 of these. To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided. The front of t...Read morehe burner will connect to the Electrode W/ Wire/Collector. They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled. This part includes one threaded pin and one cotter pins.

This genuine Char-Broil replacement flame tamer is designed to help your grill perform at its best. Sold individually, this part serves two important functions: it evenly diffuses heat from the burners below to ensure consistent cooking, and it acts as a barrier to prevent grease and food particles from clogging or damaging the burners. ...Read more Made from durable materials and built to match original specifications, this flame tamer helps extend the life of your grill while improving heat distribution and reducing flare-ups. Whether you're replacing a worn part or upgrading your grill’s performance, this OEM component is a smart and simple solution.

Genuine Char-Broil replacement part, this item is sold individually. This part is placed directly beneath the 3482121 Cooking Grate. Its purpose is to stop flame flareups on your food and distribute the heat evenly. It is made of stainless steel and measures 18-5/16" Long x 7-5/8 Wide x 1-1/4" thick.

This is a Genuine Manufacturer Approved Control Knob used on Char-Broil Gas Grills. It helps to control your Burners. This part is made out of Plastic and it is Sold Individually. Replacing this part does not require any tools, this Knob fits over the Regulator Shaft. Please note Bezel is Sold Separately.

This replacement part is specially designed for use with Char-Broil grills. It is an authentic OEM item, not an aftermarket equivalent. This carryover tube is used to carry the flame from one burner to another as well as supporting for the burners themselves. Over time tubes tend to rust in combination of heat and moisture requiring repla...Read morecement. Please note, this stainless steel tube is sold individually. This assembly includes two cotter pins to secure the carryover tube.

This is a genuine Char-Broil replacement part, sourced from the original manufacturer for use with outdoor grills. The bumper is silicone rubber, and used on the main lid. This bumper protects the lid and burner box from damage when closing the lid. The bumper is sold individually.

This item is a genuine Char-Broil replacement part that is intended to be used with outdoor gas grills. The metal rail attaches to the bottom side of the firebox and is used to mount the grease tray to catch food drippings. The left rail is priced as a single replacement part.

An authentic manufacturer-sourced item that is specially designed for use with Char-Broil grills. This is one of the rails used to support the grease tray. It is a high-quality component which is made of durable metal and it is sold individually, please note the hardware to secure it is sold separately.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.

This is a manufacturer sourced semi-circular temperature gauge/thermometer designed for use with Char-Broil grills. It can be used to measure temperature inside the grill and the temperature of the food. This part is made out metal and it is sold individually. Wingnut is included. Dial reads 0 - 700 degrees.