4618296 Char-Broil Grill - Overview

This is an individual plastic wheel compatible with various models of outdoor grills. This wheel attaches to an axle rod at the bottom of the grill assembly, allowing you to move it around. If you find your grill difficult to move and notice that the wheel(s) do not rotate or move smoothly due to damage or warping, you will need to replac...Read moree this wheel. Consider ordering multiple wheels if you find that more than one is not moving properly. This wheel measures approximately 6 inches in diameter and has a 1 1/16-inch outer diameter and 3/8-inch inner diameter bearing. To replace this wheel, you only need to remove the pin that secures it to the axle rod. Then, you can slide off the old wheel and install and secure the new wheel in place.

This is an OEM replacement part sourced directly from Char-Broil for use with a gas grill. The purpose of a vaporiser bar is to distribute the heat evenly and prevent grease drippings from reaching the burner tubes which prevents flare-ups. Unfortunately, over time the vaporiser bar will rust and require replacement. This part is made of a high-quality metal and is sold separately.

The electrode is made of metal and helps to light the burner. This item is available as an individual replacement part. A screwdriver and a socket set might be needed during the installation process. It will need to be replaced if it breaks. This is an OEM replacement part for use in Char-Broil grills.

This is an authentic Char-Broil replacement part manufactured for use with outdoor grills. The metal grease cup clip fits onto the underside of the cook box and is used to hold the grease cup which collects cooking drippings. The grease cup clip is sold individually.

This is a genuine manufacturer-sourced component which is specially made for use with Char-Broil grills. It is an identical replacement for a missing or a faulty collector box twist lock that was installed on a new unit. This is the part that helps to lock the collector box. Please make sure to refer to the appropriate diagrams of your mo...Read moredel for the correct location and application of this part. Keep in mind this high-quality component is made of durable metal and is sold individually.

This is a genuine manufacturer-sourced replacement warming rack, it is specially designed for use with Char-Broil grills. It is generally utilized to keep the vegetables and the breads toasty while the main course is searing on the lower deck. This is a high-quality chrome plated warming rack which is sold individually.

This is an authentic Char-Broil replacement part manufactured for use with outdoor gas grills. The special briquet grate is used to support the ceramic briquets that provide a unique cooking experience and flavor. This briquet grate is available as an individual replacement part, please see model parts list for associative parts.

This is an authentic OEM replacement burner and electrode assembly designed for Char-Broil gas grills. Burners are designed to distribute gas evenly to create a cooking area. This assembly is made out of stainless steel and it is sold individually. No tools needed to replace this burner. • Make sure the gas tank is disconnected • Di...Read moresconnect the electrode • Remove burner from the valve • Install the new assembly • Re-connect electrode and test the grill

The is an original Char-Broil replacement part manufactured for use with outdoor grills. This warming rack attaches to the sides of the lid and fire box. The warming rack pivots when the lid is raised. For grills with two racks, this is the lower of the two and is sold individually.