4618155 (2001) Char-Broil Grill - Overview

This is an individual plastic wheel compatible with various models of outdoor grills. This wheel attaches to an axle rod at the bottom of the grill assembly, allowing you to move it around. If you find your grill difficult to move and notice that the wheel(s) do not rotate or move smoothly due to damage or warping, you will need to replac...Read moree this wheel. Consider ordering multiple wheels if you find that more than one is not moving properly. This wheel measures approximately 6 inches in diameter and has a 1 1/16-inch outer diameter and 3/8-inch inner diameter bearing. To replace this wheel, you only need to remove the pin that secures it to the axle rod. Then, you can slide off the old wheel and install and secure the new wheel in place.

This is an OEM replacement part sourced directly from Char-Broil for use with a gas grill. The purpose of a vaporiser bar is to distribute the heat evenly and prevent grease drippings from reaching the burner tubes which prevents flare-ups. Unfortunately, over time the vaporiser bar will rust and require replacement. This part is made of a high-quality metal and is sold separately.

This is an authentic Char-Broil replacement part manufactured for use with outdoor gas grills. The wire has rounded push on connectors at each end and is used to carry an electric charge from the ignitor to the electrode to light the main burners. This wire is sold as an individual replacement part. • 11" in length.

The electrode is made of metal and helps to light the burner. This item is available as an individual replacement part. A screwdriver and a socket set might be needed during the installation process. It will need to be replaced if it breaks. This is an OEM replacement part for use in Char-Broil grills.

This is an authentic Char-Broil replacement part manufactured for use with outdoor grills. The metal grease cup clip fits onto the underside of the cook box and is used to hold the grease cup which collects cooking drippings. The grease cup clip is sold individually.

This cooking grate is a genuine Weber replacement part that is specially manufactured for use with gas grills. It used to support the food over the burners providing for the best grilling experience. It is advised to clean it after each use to prevent rusting which normally is caused by the heat and moisture from the left over food. This cooking grate made from durable metal and it is sold individually.

This is a genuine manufacturer-sourced replacement warming rack, it is specially designed for use with Char-Broil grills. It is generally utilized to keep the vegetables and the breads toasty while the main course is searing on the lower deck. This is a high-quality chrome plated warming rack which is sold individually.