4617100 (2001) Char-Broil Grill - Overview

This is an individual plastic wheel compatible with various models of outdoor grills. This wheel attaches to an axle rod at the bottom of the grill assembly, allowing you to move it around. If you find your grill difficult to move and notice that the wheel(s) do not rotate or move smoothly due to damage or warping, you will need to replac...Read moree this wheel. Consider ordering multiple wheels if you find that more than one is not moving properly. This wheel measures approximately 6 inches in diameter and has a 1 1/16-inch outer diameter and 3/8-inch inner diameter bearing. To replace this wheel, you only need to remove the pin that secures it to the axle rod. Then, you can slide off the old wheel and install and secure the new wheel in place.

This is an authentic Char-Broil replacement part sourced from the original manufacturer, not an aftermarket imitation part. This metal vaporiser bar fits above the burners, and disperses the heat from the flame, and protects the burner from drippings. The vaporiser bar is sold individually. Measurements • Length 23 1/2", Width 2 9/16"

The electrode is made of metal and helps to light the burner. This item is available as an individual replacement part. A screwdriver and a socket set might be needed during the installation process. It will need to be replaced if it breaks. This is an OEM replacement part for use in Char-Broil grills.

This is an authentic Char-Broil replacement part manufactured for use with outdoor grills. The metal grease cup clip fits onto the underside of the cook box and is used to hold the grease cup which collects cooking drippings. The grease cup clip is sold individually.

This replacement push button ignitor is an authentic OEM sourced item that is designed for use with Char-Broil grills. Ignitor produces the spark to light up the gas that travels through the burner. One high quality plastic item is included per order, please note it is battery powered ignitor, battery is not included it is sold separately.

This is an authentic Char-Broil replacement part manufactured for use with outdoor gas grills. The special briquet grate is used to support the ceramic briquets that provide a unique cooking experience and flavor. This briquet grate is available as an individual replacement part, please see model parts list for associative parts.

This is a genuine manufacturer approved replacement Burner set is designed for use with Char-Broil grills. This burner assembly is made out of stainless steel and it is sold individually. Includes one bar burner and electrode. This is the part that the flames rise from. No tools needed to replace this burner. • Disconnect wire from t...Read morehe igniter electrode on old burner • Remove burner from the valve and install the new assembly. • Reconnect electrode wire

This is a genuine OEM supplied component which is specially made for use with Char-Broil grills. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this pal nut. This part provides an identical replacement for a mis...Read moresing or a faulty component that was included with a new unit. Keep in mind this high-quality nut is made of durable metal and is sold individually.