461246804 Char-Broil Grill - Overview

This is a Genuine OEM replacement part designed for use with Char-Broil Grills. It is a Caster socket insert for rectangular Steel Tube Legs. This part is made out of Plastic and it is Sold Individually. To attach this Socket to a unit use a Bolt and a Nut (Not Included) to secure it to the Metal Leg of a Cart Side Panel. Then, simply bolt in the bottom of the Socket.

This is an adjustable burner bracket designed for use with Char-Broil grills. It contains stainless carryover channels. Adjusts 23-1/2" to 25". Includes 2 bar extensions, 2 angled extensions for brackets ending at an angle, hardware and instructions. Fits burners up to 2-5/8" wide. You would need a screwdriver to complete this repair.

This is an authentic Char-Broil replacement part that has been sourced from the original manufacturer to be used with outdoor grills. The ignitor kit is used to create an electric arc at the burner tube which lights the fuel that is emitted by the burners. This kit includes the mounting bracket, ignitor switch, electrode, and the wire.

This is an authentic replacement burner which is supplied directly from the original equipment manufacturer for use with Char-Broil grills. It is the component that the flames would rise from, over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality cast iron part is sold individually.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.

This is a genuine replacement part specially designed for Char-Broil gas grills. Cooking grate provides a stable cooking area for grilling. To increase the life of these grates it is recommended to clean them after each use. It is best to use a nylon brush and warm soapy water or biodegradable grill cleaner. Seasoning the grates with cano...Read morela oil will also help to keep food from sticking and prevent rust. Includes two (2) grates per order. This cooking grate is made out metal with black porcelain coating.

This is a genuine OEM replacement part designed for use with Char-Broil grills. The thermometer is constructed of metal and glass, and is sold individually. This important item measures the grill and food temperature. No tool should be needed for making the replacement, as the part is screwed into place. It is recommended to refer to the manual for further safety and repair instructions.

This is a genuine manufacturer-sourced replacement control knob, it is specially designed for use with Char-Broil grills. It is secured on the regulator shaft to provide a user with a comfortable grip for adjusting the burner. Please note this durable plastic part is sold individually.

This is a genuine OEM approved flame tamer for use in a variety of Char-Broil grills. The purpose of the flame tamer is to help protect the burners from drippings that may fall through the grill grates. Made up of a high quality metal which is made to withstand the high temperatures of your barbecue. These are sold separately.