4090HMK103 Rolair Compressor - Overview

This is a genuine OEM sourced replacement isolator foot that help to keep you air compressor stable and also help to minimize the vibration. This item is made out of rubber with metal and it is sold individually. Please note the screw used to attach it is sold separately. You would need a wrench to replace this item.

This is an authentic replacement part manufactured for use with Rolair wheeled compressors. The handle grip is used to provide a better grasp on the handle when moving the compressor. This handle grip is sold as an individual replacement part.

This drain valve is an OEM direct from Rolair. Compatible with electric and gas compressors, the metal part is fitted at the base of the tank. This item allows the operator to drain the tank following each extended use. Regularly draining the tank prevents rust and leakage. The drain valve is sold individually. A wrench set may be necessary for the proper removal and installation.

Safety Valve Included

Pilot Unloader Valve - 1/4" Tube, Pilot 1/4" M NPT

This is an authentic Rolair replacement part that has been sourced from the original manufacturer. The hose clamp is intended to be used with air compressors. This metal clamp is used to secure the air hoses to the coupler on the manifold and the quick disconnect. The hose clamp is sold as an individual replacement part.

This regulator is supplied directly from the original equipment manufacturer. Constructed of durable metal and plastic, this item is made for use with several air compressors. The regulator is fastened to the accessory bracket, allowing the operator to select the amount of air pressure for the tool in use. A wrench or pair of pliers may b...Read moree required for the removal and installation. The regulator is sold individually. Please refer to manual for repair and safety instructions.

This is an original part from Rolair. The rubber hose is compatible with several air compressor devices, and is sold individually. This item is often fitted in a couple of sections of the pump-less engine. For the repair, a wrench and pliers are helpful with the removal and replacement. Please refer to the specific manual for safety and installation instructions.

This is an original Rolair replacement part manufactured for use with air compressors. The special belt is used to link the motor pulley and the flywheel in order to drive the pump. This belt is available as an individual replacement part, please see model diagram for associative parts.