365SSR (201043445) Ryobi Trimmer - Overview

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part ...Read moreof proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their functio...Read moren of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose is to keep pressure on the Bump Head Knob Assembly.

This retainer clip is a metal piece used to secure components and provide stability inside trimmers. It is an authentic manufacturer replacement clip which is positioned on the trimmer hub and designed to hold the spool in position during use. If the retaining clip is worn down or broken, the trimmer head and outer spool will come loose a...Read morend may slip off the shaft, the trimmer line will tangle and jam, and the trimmer may experience reduced power. You will need a small screwdriver and set of pliers to remove the faulty clip, and a retainer ring tool to lock the new one in position. This part is sold individually.

This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for replacing the carburetor mount gasket is if there is oil leaking from the crankcase, the crankcase gasket is missing or damaged or any time the ...Read morecrankcase cover is removed. This part is sold individually. The tools that you will need to replace the carburetor mount gasket is a receptacle for draining fuel, Phillip's / Torx drivers, long-nosed pliers and a razor blade.

It is a genuine replacement part which is supplied directly from the original equipment manufacturer for use with handheld lawn and garden equipment. The purpose of this special cap is to keep the fuel in the tank, this part provides an identical replacement for a missing or damaged component which came with the new unit. It is a high-quality part which is made of durable plastic material and is sold individually.

This is an original replacement part manufactured for use with trimmers. The metal blade assembly attaches to the trimmer guard with two nuts and bolts, the hardware will come with the blade assembly. The blade assembly is used to trim excess line, the blade assembly is sold individually.

It is a genuine manufacturer-sourced replacement part that is supplied for use with handheld trimmers and tillers. This is the special clamp assembly which is used to secure the gearbox assembly to the outer boom housing. It is a high-quality component which is made of durable metal and it is sold individually.

This throttle trigger spring is an OEM part guaranteed to fit the trimmers listed below. It attaches to the throttle trigger (part # 791-181807). When dismantling the handle, be sure to take detailed note of the positioning of all related parts. Small parts such as this spring are easily lost or damaged; keeping a backup is recommended. Sold individually.

This genuine item is supplied by the original equipment manufacturer for use with handheld lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt which is utilized to secure the muffler, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this ha...Read morerdware. Keep in mind this high-quality bolt is made of durable metal and is sold in a pack of two.

The air cleaner filter is an OEM direct from Ryobi and is used with a Ryobi trimmer. This part is used to keep dust and debris from entering the carburetor causing it to clog. It is recommended the filter be checked after every use and replaced when worn. This part is made of a foam material and is sold separately.