362 (Type 5) Porter Cable Sander Polisher - Overview

This Trigger switch has 4 terminals and a locking mechanism on the trigger. This authentic Porter Cable replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical pola...Read morerity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are: • The tool has stopped functioning - it refuses to start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.rnrn3.5" L 7/8" Depth 3/4" W

This is an authentic part supplied directly from original manufacturer. It is commonly used with belt sanders. Its purpose is to deliver power to the tool. If the cord is damaged or torn it is important to replace it immediately. It is made from tough, thick outer rubber insulation for a long service life. Please note the cord protector/g...Read morerommet is sold separately. Replacing this power cord should only require a screwdriver. • Remove housing screws • Separate housing • Disconnect wires • Remove old cord • Secure new cord in place • Reattach wires • Reassemble and test the unit

This bearing helps to support armature and allows it to spin freely. It is a commonly used replacement item on Porter Cable and Black & Decker belt sanders. Bearings are designed to support and allow rotating parts to spin freely. Over time due to constant pressure and heat generated by motion this ball bearing will need to be replaced. I...Read moret is an authentic item sourced directly from original equipment manufacturer. Includes one (1) sealed metal bearing per order.

This part is an OEM from the Porter Cable manufacturer. The metal gear is compatible with many belt sander devices. The gear is fitted between the nut and the ring, helping to rotate the drive belt. A screwdriver is needed in the repair. This component is sold individually.

Included in part number 882350

Included in part number 864707

Bag W/ Elbo