351 (Type 1) Porter Cable Sander Polisher - Overview

Genuine OEM Replacement Part used on a variety of Power Equipment. This part is made out of Metal and is Sold Individually. Terminal Eyelet allows you to safely and easily secure a wire to the needed part of the tool using only a screw.

This is a Genuine OEM Approved replacement part used on Porter Cable Sanders. This switch has a Plastic Body and it includes Metal Screws and Terminals. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring...Read more replacement. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassemble the Housing

A tool that cuts out when its cord is moved may have a damaged power cord. Before replacing it, inspect the plug, outlet, extension cord, switch, motor brushes, and connections inside the tool. Confirm fit with the complete tool model because the wire ends and strain relief may differ. Unplug the tool and wait for it to stop fully. Mark e...Read moreach wire before disconnecting it, and never bypass the ground wire. Follow the original cord path, tighten the clamp, close the housing, and have the tool tested for electrical safety before use.