My Orders
31AS6CEG731 (2005) Husky Snow Blower - Overview
Diagrams for 31AS6CEG731
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Nut-flglk 5/16-18
Part #712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location.
While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations.
Customers rate this repair as Easy.
Read less
$47.00
In Stock
Plate-shave 26
Part #790-00121-0637
This part is sold by color. Please see color options below to see what part number you need to order. Color: Majestic Orange. Part Number: 790-00121-0606. Color: Powder Black. Part Number: 790-00121-0637. Color: MTD/Troy-Bilt Red. Part Number: 790-00121-0638. Color: Red Metallic. Part Number: 790-00121-0650. Color: Oyster Gray. Part ...Read moreNumber: 790-00121-0662. Color: Polo Green. Part Number: 790-00121-0689. Color: Black Jack. Part Number: 790-00121-0691. Color: Mastercraft Green. Part Number: 790-00121-0709. Color: Sears Red. Part Number: 790-00121-4044. Color: Cub Yellow-2. Part Number: 790-00121-4021. Color: Fint Mica. Part Number: 790-00121-4033. Color: Pure Orange. Part Number: 790-00121-4041.
Read less
$45.11
In Stock
Snow Blower Shave Plate (24 In)
Part #790-00120-0637
This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. This high-quality shave plate is ...Read moremade of durable material and is sold individually. Keep in mind the hardware to secure it is sold separately.
Read less
$39.46
In Stock
Snow Blower 22" Shave Plate
Part #790-00117-0637
This replacement shave plate is a high-quality item supplied directly from original equipment manufacturer for use with snow throwers. Its purpose is to scrape the ground to help pick up the snow. Shave plates are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn shave plate ...Read morebecause it will no longer be able to clear the sidewalk, leaving patches behind. Please note, paddles and scrapers are designed to wear at approximately the same rate, so it's always a good idea to replace them both at the same time. This durable shave plate is sold individually.
Read less
$120.10
In Stock
Auger Assembly - Right Hand
Part #684-04108A-0637
$6.61
Special Order
Hex Screw, 5/16-24 X .750
Part #710-0627
$48.86
In Stock
Snow Blower Shave Plate (28 In)
Part #790-00118-0637
$6.92
In Stock
Flange Bushing
Part #741-0493C
This authentic manufacturer-supplied part is designed for Craftsman snowblowers. Flange bushings are used to provide support for components while allowing them to rotate with minimum friction. It is made of high-quality material and is sold individually. Make sure to check the diagrams for your model to ensure the correct replacement proc...Read moreedure. You may need a screwdriver and a wrench set to take apart and reassemble the equipment when performing this repair.
Read less
$51.07
In Stock
Plate-shave 30
Part #790-00119-0637
This is a genuine replacement part sourced directly from the manufacturer. The shave plate is commonly found on snowblowers from MTD and Yard Man. This part is made of metal, and is used at the base of the spiral housing to scoop snow up from the ground into the blower. You will require a wrench when replacing this part. This item is sold individually.
$6.84
In Stock
Plug, 1/4 x.437
Part #721-0325
This is an authentic replacement part manufactured for use with Ryobi snowthrowers. The grease plug is commonly used to seal the oil port on the auger\\\'s gearcase assembly. This grease plug is available as an individual replacement part, please see model diagram for associative parts.
$30.53
Special Order
CHUTE-UPPER W/LBL
Part #731-04426C
This replacement part is an authentic manufacturer-sourced component which is specially designed for use with snowthrowers. It is mounted to the lower chute to help direct the snow away from the unit. This part is made of high-quality plastic material and it is sold individually, please note the hardware to secure it is sold separately.
$6.40
Special Order
Bolt, Carr.
Part #710-0276
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More