31AH65FH700 (2015) Yard Machines Snow Blower - Overview

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Ensure reliable cold-weather starts with this genuine OEM primer bulb, designed specifically for use with Yard Machines and MTD snowblowers. Unlike aftermarket alternatives, this high-quality part is sourced directly from the original manufacturer, guaranteeing a perfect fit and dependable performance. The primer bulb plays a crucial r...Read moreole by forcing fuel into the carburetor, making it easier to start your engine—especially in colder conditions. Over time, the rubber material can lose elasticity or develop cracks, which can affect performance and require replacement. This durable rubber primer bulb is built to withstand regular use and is sold individually. Replacing a worn primer bulb is a simple and effective way to keep your snowblower running smoothly all season long.

This is an authentic replacement part manufactured for use with Ryobi snowthrowers. The grease plug is commonly used to seal the oil port on the auger\\\'s gearcase assembly. This grease plug is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine replacement part sourced directly from the manufacturer. The shave plate is commonly found on snowblowers from MTD and Yard Man. This part is made of metal, and is used at the base of the spiral housing to scoop snow up from the ground into the blower. You will require a wrench when replacing this part. This item is sold individually.

This is an authentic replacement part manufactured for use with outdoor power equipment. The plastic fuel cap includes the seal to prevent spillage. The cap features an ergonomic grip, and is easily installed, no tools are required. Please note the fuel cap is sold individually.

This is an authentic replacement part, sourced from the original manufacturer for use with snowthrowers from MTD, Yard Machines, Troy-Bilt, and Yard Man. This is a complete part assembly that is used to engage the flywheel to start the motor and to rewind the pull rope. This item is available as an individual replacement part.

This flange bolt is a genuine OEM replacement fastener designed for use in a variety of lawn and outdoor equipment. It is 10mm long, with a diameter of 6mm, and a 1-millimeter thread pitch. It has a strength rating of 8.8 and it is used to secure various components together and ensure their stability during operation. The bolt has a hexag...Read moreonal-shaped head for easy gripping and a protruding outer rim at its base known as a flange. This flange helps to evenly distribute the load of the fastener and prevent damage to the mounting surface during tightening. It is recommended to inspect all the bolts on your equipment and if you note that any of them are cracked, corroded or the threads are worn down, you will need to replace them. Use a wrench to unthread the faulty bolts and install the new bolts into the mounting holes. Be careful not to overtighten your bolt(s) as you may risk damaging the equipment and stripping the bolt threads. Each bolt is sold individually.

This is an authentic manufacturer made replacement part which is specially designed for use with Yard Machines, MTD, Troy-Blit, and Yard-Man snowblowers. When the recoil starter handle is pulled, the starter rope rotates the starter pulley causing the engine turn fast enough to generate a spark to ignite the fuel in the chainsaw. This par...Read moret is made of durable plastic and is sold individually. For instillation you will need a screw driver and a pair of needle nose pliers.