Models > 31-2208-23-01

31-2208-23-01 Tappan Range - Overview

Sections of the 31-2208-23-01

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 8" – Part Number: 316048413
Drip Bowl - 8"
★★★★★
★★★★★
(100)
PartSelect #: PS437595
Manufacturer #: 316048413
This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits benea...
$12.59
  In Stock
Rear Drawer Glide – Part Number: 3051163
Rear Drawer Glide
★★★★★
★★★★★
(59)
PartSelect #: PS434227
Manufacturer #: 3051163
If you are having trouble opening your drawer easily or it has been damaged/broken, replacing the rear drawer glide could be the solution. The glide attaches to the rear of the oven drawer and support...
$5.33
  In Stock
Front Drawer Glide – Part Number: 3051162
Front Drawer Glide
★★★★★
★★★★★
(28)
PartSelect #: PS434226
Manufacturer #: 3051162
The front drawer glide is designed to help the bottom drawer on your range slide in and out smoothly. If the drawer is not operating as intended, or the drawer will not close all the way, the front dr...
$6.03
  In Stock
Chrome Drip Bowl - 6" – Part Number: 316048414
Chrome Drip Bowl - 6"
★★★★★
★★★★★
(75)
PartSelect #: PS437596
Manufacturer #: 316048414
The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your...
$6.67
  In Stock
Terminal Block Kit – Part Number: 5303935058
Terminal Block Kit
★★★★★
★★★★★
(37)
PartSelect #: PS470125
Manufacturer #: 5303935058
This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If y...
$16.24
  In Stock
Surface Element - 8 Inch - 220V – Part Number: 316442300
Surface Element - 8 Inch - 220V
★★★★★
★★★★★
(23)
PartSelect #: PS2339241
Manufacturer #: 316442300
If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part i...
$34.52
  In Stock
Surface Element - 6 Inch – Part Number: 318372210
Surface Element - 6 Inch
★★★★★
★★★★★
(9)
PartSelect #: PS2582086
Manufacturer #: 318372210
This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if...
$35.48
  In Stock
Oven Rack – Part Number: 316067902
Oven Rack
★★★★★
★★★★★
(4)
PartSelect #: PS437923
Manufacturer #: 316067902
Oven racks can become rusted or damaged from constant use, and need to be properly maintained and cleaned to keep them working properly. If you notice that your oven rack has been damaged or rusted, t...
$81.35
  In Stock
Main Terminal Block Kit – Part Number: 5304409888
Main Terminal Block Kit
★★★★★
★★★★★
(12)
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
$9.37
  In Stock
Burner Switch Kit – Part Number: 5303935086
Burner Switch Kit
★★★★★
★★★★★
(8)
PartSelect #: PS470145
Manufacturer #: 5303935086
This is a burner switch kit, also known as the surface element control switch repair kit, for ranges. This burner switch kit sends voltage to the surface element coil and it controls the stove top sur...
$40.14
  In Stock
Broil Element – Part Number: 5303051140
Broil Element
★★★★★
★★★★★
(5)
PartSelect #: PS453940
Manufacturer #: 5303051140
This broil element is found on the roof of the oven.
$154.15
  In Stock
Thermostat Knob – Part Number: 5303131953
Thermostat Knob
★★★★★
★★★★★
(1)
PartSelect #: PS454121
Manufacturer #: 5303131953
This knob accepts a D-shaped shaft.
$70.62
  Special Order

Questions And Answers for 31-2208-23-01

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 31-2208-23-01

[Viewing 6 of 6]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
drawer glides were broke on front and back
used a screwdriver pushed the old ones out put the new in. the video instructions were great.
Parts Used:
Rear Drawer Glide Front Drawer Glide
  • bryan from sparta, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
570 of 589 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front slide of bottom drawer broke off.
Inserted new slide as directed by video. Very easy and video was very helpful.
Parts Used:
Front Drawer Glide
  • Jeanette from Alpharetta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
468 of 470 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place
Parts Used:
Terminal Block Kit Rear Drawer Glide Front Drawer Glide
  • Steven from Taylors, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
381 of 388 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!