30094 Toro Lawn Mower - Overview
Models starting with 30094
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Nut-lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$6.40
In Stock
Screw-taptite
PartSelect #: PS9180925
Manufacturer #: 95-1726
This is a high quality replacement hardware that is specially manufactured for use on Toro lawn and garden equipment. Two of these screws are generally used to secure the belt guide to the mower deck....
$6.40
In Stock
Push Rod
PartSelect #: PS8860046
Manufacturer #: 13116-2057
This OEM Push Rod is a silver, metal part, approximately 5.5 inches long. It can be installed using a wrench or sockets. A Spark Plug Gap Tool may also be needed for maintenance. The installation of t...
$6.63
In Stock
Nut-lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$6.40
In Stock
Lawn Mower Ignition Key
PartSelect #: PS9051002
Manufacturer #: 63-8360
This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental ...
$8.11
In Stock
Oil Seal
PartSelect #: PS9157914
Manufacturer #: 92049-7019
This genuine oil seal is a brown, rubber part, measuring 8 x 14 x 5mm. This part can be installed using a screwdriver, wrench set, pliers, and pick, and a seal puller may also be required for maintena...
$6.40
In Stock
Rocker Case Gasket
PartSelect #: PS8843310
Manufacturer #: 11060-7001
This Gasket-Rocker Case is a grey, individually sold part, direct from the original equipment manufacturer. It requires only a socket to install and is rated as Easy to install by customers.
This pa...
$9.13
In Stock
Oil Filter
PartSelect #: PS8981008
Manufacturer #: 49065-2071
This replacement oil filter is specially designed for use with Kawasaki engines. It is a genuine OEM sourced part, not an aftermarket immitation. This oil filter is used to remove contaminants from th...
$19.86
In Stock
Engine Ignition Coil
PartSelect #: PS9270840
Manufacturer #: 21171-7034
This genuine ignition coil assembly—also known as an armature-magneto—is a direct replacement part sourced from the original equipment manufacturer for use with Kawasaki engines. It plays a critical r...
$90.69
On Order
Fuel Filter
PartSelect #: PS11835770
Manufacturer #: 49019-0027
This OEM Fuel Filter is a white, individually sold, plastic part, which measures 3 x 1.25 inches. It can be installed using pliers and is rated as Easy to install by customers (Tip: Make sure the fuel...
$12.98
In Stock
Exact Part matches for your search term
[Viewing 2 of 2]
Washer, Insulating
This part number matches the current model number 30094
PartSelect #: PS8947199
Manufacturer #: 30094
No Longer Available
Plate
This part number matches the current model number 30094
PartSelect #: PS12444866
Manufacturer #: 30094
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Parts Used:
-
Michelle from AYLETT, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
15 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!