3000127V (F 013 300 002) Dremel Router - Overview

It is a genuine item that is supplied by the original equipment manufacturer for use with Dremel rotary tools. This item provides an identical replacement for a missing or a faulty nose cap that was installed on a new unit. Please make sure to refer to the owners manual and the appropriate diagram of your model for the correct application...Read more of this component. It is a high-quality part which is made of durable materials and is sold individually. Keep in mind the #2615000480 Collet-1/ 8 and the #2610014582 Collet Nut are both sold separately.

This is a Genuine replacement part designed for Dremel Rotary Tool. It helps to lock the the Spindle Shaft. It is Made out of Metal and it is Sold Individually. This Assembly includes a Collar and a Pin. To complete the repair you would need a Hex Key/Allen Wrench.

This genuine OEM sourced replacement armature and bearing assembly that is specially made for Dremel rotary tools. The armature is one of the main components inside an electric motor, in combination with the motor's field it creates a magnetic field, which causes the armature to rotate. It is a complete assembly which includes a high-qual...Read moreity metal armature, a plastic fan, armature bearing and commutator end bearing. It is highly recommended to replace both carbon brushes when replacing an armature. Please note this assembly is sold individually.

Genuine manufacturer sourced replacement switch used on Dremel rotary tool. It is an important part of the tool which handles on/off operations. Because switches have mechanical parts, they will tend to wear out over time, eventually requiring replacement. Switch has a plastic body and it is sold individually. To replace this switch you ...Read morewould need a Screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

This is a genuine Dremel replacement part, it is sold individually. The purpose of the Collet Nut is to secure the collet with the bit of your choice in the shafts assembly of the Dremel tools shown below. By pressing on the lock assembly on the tool and using the wrench provided with your tool you can secure or release the Collet Nut.

This is a Genuine Manufacturer Approved replacement part used on some Dremel Rotary Multi-Tools. This part provides the firm grip for holding a bit in a tool. This Collet is for using bits with 1/8" arbors. Due to prolonged, heavy use a collet may need to be replaced. Collet Nut is sold separately.

An authentic OEM sourced item that is supplied for use with Dremel power tools. This special ring helps to provide a seal for the armature, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable rubber and is sold i...Read morendividually, over time the material may wear out and begin to crack eventually requiring a replacement.

This is an authentic Dremel replacement part, it is not an aftermarket imitation. It is specialyl designed for use on rotary tools. The purpose of the brush cap is to secure the brush in the holder. Please note, this durable plastic brush cap is sold individually. You will need a flat-head screwdriver to install or remove this item.

This is an authentic Dremel replacement part manufactured for use with rotary tools. The shaft lock button is used to actuate the shaft lock assembly. This shaft lock button is available as an individual replacement part, please see model diagram for associative parts.