Models > 30-2272-23/07

30-2272-23/07 Tappan Range - Overview

Sections of the 30-2272-23/07

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter – Part Number: 5303935066
Flat Style Oven Igniter
★★★★★
★★★★★
(45)
PartSelect #: PS470129
Manufacturer #: 5303935066
This is a flat style oven igniter used to light the oven burner in a gas range. When the element in this igniter glows white hot, the gas is released from the safety valves, which lights the oven burn...
$70.52
  In Stock
Order within the next 3 hrs and your part ships today!
Light Bulb – Part Number: 316538904
Light Bulb
★★★★★
★★★★★
(11)
PartSelect #: PS12751166
Manufacturer #: 316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
$19.88
  In Stock
Order within the next 3 hrs and your part ships today!
RACK – Part Number: 5304526378
RACK
PartSelect #: PS16731275
Manufacturer #: 5304526378
Oven racks can become rusted or damaged from constant use, and need to be properly maintained and cleaned to keep them working properly. If you notice that your oven rack has been damaged or rusted, t...
$33.17
  In Stock
Order within the next 3 hrs and your part ships today!
Surface Burner Igniter Electrode – Part Number: 316011200
Surface Burner Igniter Electrode
★★★★★
★★★★★
(4)
PartSelect #: PS436633
Manufacturer #: 316011200
Use this igniter with sealed burners.
$33.61
  In Stock
Order within the next 3 hrs and your part ships today!
Inner Oven Door Glass Panel – Part Number: 316088600
Inner Oven Door Glass Panel
★★★★★
★★★★★
(11)
PartSelect #: PS438400
Manufacturer #: 316088600
This part is the replacement inner oven door glass for your oven. It is made of glass and is approximately 16 inches wide and 7 inches long. The oven door glass allows you to see inside the oven when ...
$62.76
  In Stock
Order within the next 3 hrs and your part ships today!
Drip Pan – Part Number: A316011400
Drip Pan
★★★★★
★★★★★
(1)
PartSelect #: PS1537672
Manufacturer #: A316011400
This part is located beneath the element and catches any spills.   No Longer Available
Oven Thermostat - 125V 60Hz – Part Number: 316032411
Oven Thermostat - 125V 60Hz
★★★★★
★★★★★
(1)
PartSelect #: PS2339203
Manufacturer #: 316032411
This part establishes and maintains the internal temperature of the oven cavity.
$119.51
  In Stock
Order within the next 3 hrs and your part ships today!
Top Burner Mounting Screw with Washer – Part Number: 316069301
Top Burner Mounting Screw with Washer
PartSelect #: PS437925
Manufacturer #: 316069301
This is now a new zinc and black-coated screw that will resist rust and seizing.
$2.47
  In Stock
Order within the next 3 hrs and your part ships today!
Safety Valve – Part Number: 3203459
Safety Valve
★★★★★
★★★★★
(2)
PartSelect #: PS446204
Manufacturer #: 3203459
This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.
$350.16
  In Stock
Order within the next 3 hrs and your part ships today!
Burner Cap – Part Number: 316010901
Burner Cap
PartSelect #: PS436614
Manufacturer #: 316010901
$48.65
  Special Order
SCREW – Part Number: 316021109
SCREW
PartSelect #: PS436929
Manufacturer #: 316021109
Sold Individually.
$11.61
  In Stock
Order within the next 3 hrs and your part ships today!
Oven Light Socket – Part Number: 316116400
Oven Light Socket
★★★★★
★★★★★
(4)
PartSelect #: PS439060
Manufacturer #: 316116400
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel t...
$46.77
  In Stock
Order within the next 3 hrs and your part ships today!

Questions And Answers for 30-2272-23/07

Be the first to ask our experts a question about this model!

Common Symptoms of the 30-2272-23/07

[Viewing 7 of 7]
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Gas smell
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven quit heating.
After reading up on the problem of the gas oven not lighting I decided I needed to install a new igniter. I had read where some people just pulled a panel off the back and installed a new one.. yeah, no such luck with this model so I had to crawl into the broiler drawer space [which I had to clean out first]. Note, if you wear trifocal glasses you might as well close your eyes and replace it by feel because there is no way to tilt your head back enough to see what you are doing and still get both arms and your chest in a broiler. Also be sure to remove all cats and dogs from the area before starting. They seem to think they can help or it's a game of hide and seek and they want to hide with you.. they were no help at all.
Other than that, it was quite easy.
Parts Used:
Flat Style Oven Igniter
  • John from Darlington, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
563 of 612 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven was difficult to light, then stopped lighting altogether
1. Turned off circuit breaker to stove
2. Removed the two screws holding down the floor of the oven (screws are at back.), and then lifted it out.
3. Removed the nut holding down the flame guard, and lifted it off.
4. Opened the bottom drawer.
5. Removed the protective cover in the back left of the oven at the bottom, first removing the one screw at the bottom that holds it. This reveals a white plug, presumably going to a fuse.
6. Disconnected the white plastic connector, lifting its front tab to release it.
7. The igniter wires go to two lugs that attach at the floor of the oven at the back (one goes via the now free white connector). Slide back the plastic lug covers and use pliers to pull off the lugs. Note that the wider one (on the right) goes to the top of the igniter, while the narrower one (on the left) goes to the bottom of the igniter via the white plastic connector.
8. Removed the two bolts holding the igniter.
9. At this point, the igniter comes out. Nice, since it means you can work on the wires in comfort.
10. Slide the flame retardant sleeves away from the igniter. I found in-line connections about 1.5 inches from the igniter, and cut the wires next to these (on the side away from the igniter, of course.), and stripped the final 3/8 inch. Shorten the wires on the replacement igniter so that they are 3 or 4 inches long, slide on the flame retardant sleeves, then strip the final 3/8ths inch. Use the provided caps to connect the wires. Bottom wire goes to the plastic connector, top wire goes to the wide lug.
11. Install the new igniter by connecting the lugs, sliding on their protective plastic sleeves, reconnecting the white plastic connector, screwing in the two igniter mounting screws, and reinstalling the corner cover. Put back the flame shield and floor of the oven. Turn on the circuit breaker, and it works!
Parts Used:
Flat Style Oven Igniter
  • Ritchie from Ithaca, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
278 of 363 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Would Not Heat - Oven Ignitor Failure
I first looked up my Model Number on PartSelect.com and looked at the schematic as well as Trouble Shooted my problem.

Reading the posts by others how they Removed, Replaced, and Repaired their Oven Ignitors, I used their helpful info, and of course did mine.

1. Unplugged my Oven/Stove.

2. Removed bottom storage door to get access to cover plate.

3. Removed oven racks inside oven to gain access to and removed Flame Cover.

4. Removed Screw holding Oven Ignitor in place.

5. Unplugged Ignitor Plug from feed wird in Oven from underneath.

6. Removed Oven Ignitor from the bottom area where storage drawer was.

7. Installed new Ignitor and replaced screw holding Ignitor assembly in place.

8. Replace Flame cover and racks.

9. Plugged in new ignitor underneath, and replaced cover plate.

10. Plugged in Stove/Oven and Oven began to heat! IGNITOR worked!

11. Replaced bottom drawer and slid Stove back into position.

All went easy and only difficulty was replacing cover plate below as it is awkward and having to line up screws/holes was a bit trying.

Using Work Light essential to see well, and, some screws may or can be hard to remove.

Both my neighbor and I ordered our Ignitors within a week of each other. My Oven was Amana his is a Tappan. His failed after a few weeks, but, PartSelect replaced promptly and we are all happy.
Parts Used:
Flat Style Oven Igniter
  • Peter from Fife Lake, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
151 of 224 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!