A rusty or bent upper rack can make dishes hard to load and may block the spray. The replacement rack provides storage for smaller dishes and slides along the upper rails. First check the wheels, clips, adjusters, spray parts, and rail stops for wear. These items are not included with the rack. Match the rack to the complete appliance mod...Read moreel and compare its size and mounting points. Remove all dishes, support the rack while sliding it out, and note where each part fits. After installation, make sure the rack moves freely and cannot leave the rails.
This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts and screws in order to hold items firmly together. This piece is a fastener that attaches one item to another. This part has several advantage...Read mores, the main one being that it is universal and can be used with most pieces and appliances in your home. This hex nut is an original equipment manufacturer part, meaning it is directly sourced from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
cut wire in center sprayer to remove plastic holder for new basket
2 of 2 peoplefound this instruction helpful.
JOHN from IONIA, MI
Easy
30 - 60 mins
after that every thing went very well
Was this helpful?
Thank you for voting!
light wont come on
4 of 9 peoplefound this instruction helpful.
James from Fort Collins, CO
A Bit Difficult
1- 2 hours
Pliers, Screw drivers, Wrench set
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the break
... Read moreer. Then I saw the short and when I tested the switch it would not click. The install was fine.
Read less
Was this helpful?
Thank you for voting!
Upper dish rack broken tines
1 of 2 peoplefound this instruction helpful.
Nicholas from JACKSONVILLE, FL
Very Easy
30 - 60 mins
Screw drivers
Swapped out the old upper dish rack with a new one. A video made the change simple.