My Orders
271190 (2004) Husqvarna Lawn Tractor - Overview
Diagrams for 271190
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$11.85
In Stock
Lawn Mower Flange Wheel Bearing
Part #532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft. Over time, the part may become worn and damaged, which you will notice if you experience a squealing or grinding sound from the wheel in qu...Read moreestion, or you notice the wheel is sloppy on the shaft.
You will need a hammer and punch to complete this repair, which most of our customers rated as easy. Make sure you tap the new bearing into place evenly inside the tire rim.
Read less
$6.72
In Stock
Lawn Mower Ring Clip
Part #812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
$6.72
In Stock
Washer Head Screw
Part #584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is da...Read moremaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Read less
$6.72
In Stock
Lawn Mower Washer
Part #532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number...Read more to confirm this is the washer you need for your equipment.
This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.
Read less
$6.72
In Stock
Cap Axle Black 1 50 x 1 00
Part #532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debri...Read mores can freely enter the axle and hub, causing damage.
This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Read less
$6.72
On Order
Lawn Mower Hardened Washer
Part #532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and will need to be replaced. You may notice this part is damaged if you start hearing a grinding or rubbing noise between the tire rim and rin...Read moreg clip.
You will need a pair of needle nose pliers to carry out this repair, which our customers generally found easy.
You will locate the washer on the spindle, between the wheel and the ring clip.
Read less
$18.65
In Stock
Mandrel Ball Bearing
Part #532110485
Genuine Husqvarna replacement part, this item is sold individually. This bearing is installed on top of the shaft which is encased in the mandrel assembly. The mandrel assembly is bolted to the mower deck. The shaft of the mandrel assembly is what the blade on all of the riding mowers listed below is attached to.
$6.72
In Stock
Bolt Shoulder (5/16-18)
Part #532170165
This metal shoulder bolt, which is also called a shoulder screw or a stripper bolt, is a fastener that has a shoulder between the threaded and unthreaded sections of the bolt. This shoulder is a smooth section which supports and guides rotating parts. The threaded section of the bolt fastens parts of a machine together. This bolt has a di...Read moreameter of 5/6 inches, a thread pitch of 18 threads per inch, and a TT thread type. You can tell when a shoulder bolt is broken when the rotating parts that it is supporting becomes wobbly or misaligned. Your machine may even make unusual noises. You will need to replace a damaged shoulder bolt as soon as possible to prevent damage to your equipment. Left unrepaired, the rotating parts it is holding may become completely disconnected or collide with each other. To remove a shoulder bolt, you may need to use a wrench or socket to loosen the nut on the threaded end of it. Using a second wrench or pliers to hold the bolt in place while you loosen the nut can be helpful. Use the pliers to grip onto the shoulder of the bolt, then twist and pull the bolt out of your machine. Keep in mind that the nut does not come with this OEM-certified part, and that you need to purchase each bolt separately.
Read less
$8.98
In Stock
Ignition Key
Part #532140401
This is a genuine replacement part sourced directly from manufacturer. It is designed for use with riding lawn mowers/tractors. The ignition key is inserted into the switch to start the mower. This is a safety feature for unauthorized use of the mower. This part is made out of plastic with metal and it is sold individually.
$6.72
In Stock
Lawn Mower Bearing
Part #532003366
This is a genuine OEM part made for Craftsman lawn tractors and mowers. Bearings are used to buffer moving parts from damage due to friction. They also stabilize directional movement. Bearings are high-wear parts and are changed regularly. This metal bearing is sold individually. Gauges, washers, rings, etc. sold separately.
$6.72
In Stock
Lawn Mower Push Nut
Part #532110452
The Push Nut is a black, metal nut, which can be installed with pliers and a hammer. It's used to secure parts in place in various locations on a variety of equipment. If damaged will not longer hold in place. Installation is rated as "Easy", but it will depend on the parts your are securing and the equipment you are using. Consult your m...Read moreake, model and diagrams to ensure this is the correct part. The part is sold individually.
Read less
$6.72
On Order
Lawn Mower E-Ring
Part #812000001
E Ring Number 5133-75 is a black, metal ring for securing the position of other parts. If damaged it will become loose or fall off. Installation is rated as "Easy" and is done with a pair of pliers. Refer to your make, model and diagrams to ensure this is the correct part.
Exact Part matches for your search term
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel bushings were bad
29 of 48 people
found this instruction helpful.
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!