2704-22 (G73A) Milwaukee Hammer Drill - Overview

This is a 1/2-inch OEM keyless chuck for hammer drills, allowing users to swiftly change drill bits and attachments without requiring a chuck key. Due to the mechanical stresses it undergoes, the jaws of the chuck can break or wear significantly, resulting in a loss of grip or excessive play. If you encounter difficulty tightening or loos...Read moreening the chuck jaws on your drill or notice wobbling during operation, replacement is necessary. To replace this chuck assembly, you will need a screwdriver or drill to remove the initial left-handed screw on the inside. To completely remove the chuck, it is recommended that you secure the drill in a vise or use the drill itself, along with an Allen key, to detach the main chuck assembly from the drill. Once the old chuck is removed, you can effortlessly install the new chuck along with its securing screw. Please note that this chuck assembly is sold individually and does not include any additional securing hardware that may be required.

This item has been OEM sourced to ensure a high-quality standard. The metal screw is intended to be used with hammer drills from Milwaukee. This part is used to secure the drill's chuck to the gearbox assembly. The screw is reverse or left hand threaded, so be sure to turn it to the right to loosen and vice versa to tighten. The screw is priced as a single item.

It is a genuine OEM sourced replacement screw that is commonly utilized on Milwaukee power tools. This screw is a standard hardware which will have multiple applications depending on the model of your too, please make sure to check appropriate diagrams for correct location and use of this item. This is a high-quality Torx screw that is made of durable metal and it is sold individually.

This replacement screw is an authentic OEM sourced hardware designed for use with Milwaukee power tools. It has multiple applications depending on the tool. Please make sure to check appropriate diagrams for correct location and use of this item. Note, one torx screw is included per order.

This is an authentic Milwaukee replacement part manufactured for use with power tools. The special compression spring is used with a variety of different types of power tools. This spring is commonly used to allow flexibility between part assemblies and to prevent jarring between the part assemblies. This compression spring is sold as an ...Read moreindividual replacement part, please see model diagram for part location and usage.

This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-82-5275 Screw is to secure the Belt Clip or the Bit Clip on the models shown below. This screw requires a Torx head or a flat head screwdriver.

This part is supplied directly from the original equipment manufacturer. The Milwaukee electronics assembly is compatible with the 2704-20 M18 Fuel Hammer-Drill. Composed of metal, wiring and plastic, this item is secured to the rotor and gearbox assembly inside the drill housing. The electronics assembly is designed to send various elect...Read morerical signals in powering the drill. This part is sold individually. A hex key is needed in making the repair.

This part has been sourced from the original manufacturer to ensure a high level of quality. The gearbox assembly is intended to be used with Milwaukee hammer-drills. It is a pre-assembled gearbox that includes all the gears, bearings, and the housing. This part is used to connect the lower drive shaft and the cutting head assembly and to...Read more allow the two parts to rotate in unison. Keep in mind this high-quality gearbox assembly is sold as an individual item.