2601-059 (SER D36C) Milwaukee Electric Drill - Overview

This is a genuine Milwaukee replacement part, it is sold individually. The Milwaukee 14-46-2012 Brush Card Assembly uses four brushes, whereas most power tools use two brushes. To replace this part you will need to release the spring tension on the brush then place the brush card in its proper position. Worn brushes frequently are the...Read more cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is a genuine manufacturer-supplied part that is made for use with Milwaukee hammer drills. It is a special screw that is utilized to secure the chuck. Commonly, screws may need to be replaced due to worth threads or a head socket. It provides an identical replacement for a missing or a faulty hardware that was included with a new uni...Read moret. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. It is a left hand thread screw. Keep in mind this high-quality part is made of durable metal and is sold individually. NOTE: We have an article and a video on how to remove a chuck from a drill, here is the link to it. How to Remove a Drill Chuck

This is an authentic replacement part manufactured for use with Milwaukee drills, and drivers. The field is a tube lined with magnets. When the the field is charged with electricity it creates a magnetic field. The armature fits inside the field, and is rotated by the magnetic field. The field and the armature are the main parts of an ele...Read morectric motor. It is recommended to check the armature for damage when servicing the field, because damage to the field can cause damage to the armature, or vice versa. The field is sold in a kit of four, the kits are sold individually.

This is a genuine Milwaukee part. It is sold individually. It attaches to the bottom of the housing on a Milwaukee cordless drill. Its purpose is to hold the small screwdriver bits that are inserted into magnetic bit holders. It is compatible with the Milwaukee tools shown below.

It is a genuine OEM sourced replacement part which is specially designed for Milwaukee drills. This set contains both the right and the left sides of the handle, please make sure to refer to the appropriate diagrams of your model for the correct application of these components. Keep in mind this high-quality set is sold individually, it i...Read morencludes two plastic halves of the handle, the end cap and the hardware to secure pieces together.

This is a genuine Milwaukee replacement part that has been sourced from the original manufacturer to be used with driver/drills. The armature is one of the main components of the motor. The armature fits into the field and rotates to drive the gearcase assembly. This part is priced as a single item.

This replacement screw is an authentic OEM sourced hardware designed for use with Milwaukee power tools. It has multiple applications depending on the tool. Please make sure to check appropriate diagrams for correct location and use of this item. Note, one torx screw is included per order.

This manufacturer sourced replacement part is designed for use with Milwaukee power tools. It helps to distribute the pressure evenly between two connected parts, this is a standard hardware which has multiple applications depending on your unit. This part is made from durable metal and it is sold individually.

This is an authentic Milwaukee replacement part manufactured for use with power tools. The special compression spring is used with a variety of different types of power tools. This spring is commonly used to allow flexibility between part assemblies and to prevent jarring between the part assemblies. This compression spring is sold as an ...Read moreindividual replacement part, please see model diagram for part location and usage.

The right brush spring is made out of metal. This is an OEM part sourced directly from the manufacturer and used in impact drivers, impact wrenches, saws, and drills made by Milwaukee. This item is sold individually. During the installation process, a set of pliers might be needed to replace this part. It will need to be replaced if it breaks or bends.