Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 25365802508

25365802508 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 25365802508

If you know the refrigerator repair part you need, you can browse the list of all parts on the 25365802508, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 25365802508 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$30.97

Door Shelf Retainer Bar

The door shelf retainer bar is also referred to as a refrigerator door rack. This piece is used as an attachment on the inside of your refrigerator door. The functionality of the r...

$77.42

Crisper Pan

Also called Vegetable Drawer. Sold individually.

$13.80

Defrost Timer - 60Hz 120V

Defrost timers are part of the defrost circuit in your refrigerator and freezer. This timer cycles the defrost heater on and off. For every eight hours, the appliance timer will cy...

$60.48

Door Gasket - White

This fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air outside.

$58.06

Crisper Glass Shelf Insert

Glass only.

$15.98

Defrost Thermostat

This defrost thermostat is also known as a refrigerator defrost bi-metal thermostat kit. The function of the defrost bi-metal thermostat is to prevent overheating during the defrost cycle in your refrigerator by protecting the evaporator. The most common sign that there is a problem with your refrigerator defrost thermostat kit is if your freezer is cold but your refrigerator is warm. If your evaporator coils are icy then your defrost bi-metal thermostat kit could be defective. To do this installation the tools you will need include a 1/4 inch nut driver, a pair of wire strippers and crimpers, and a heat gun.

$0.76

Screw

$34.47

Evaporator Fan Motor Kit - 120V 60Hz

The evaporator fan motor circulates air through the food compartment for efficient cooling in refrigerators. The evaporator is located in the back of the freezer and it circulates the air over the refrigerator coils. The evaporator motor fan in your refrigerator should be replaced if the fridge section is too warm, the freezer section is too warm, orthe evaporator motor makes loud noises or stops working completely. The tools used for this repair are a 1/4 nut driver and wire strippers. *Please note: The motor has been updated by the manufacturer. Tip to detect if motor is not working, often if it fails it generates loud noises in the freezer area. For safety, make sure food is safely stored so it does not deteriorate while the power is off, and remember to unplug fridge.

$6.75

Screw

$24.48

Dairy Door - Clear

This is a dairy door for your refrigerator. This part covers the products in the dairy bin section. To access this section, simply lift the lid. This dairy door is made entirely of plastic and is transparent. It is almost 10 inches wide, and roughly 6 inches long. In order to make this repair you will not need any tools, as this part will easily clip in and out of place of the hinged holes.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Refrigerator door gasket torn

  • Customer: Matthew from Washington, DC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 209 of 215 people found this instruction helpful
No instructions included, so it took a little bit of staring at the new part to figure out how it works. The barbed ridge on the gasket fits into a slot on the door. The flat face of the gasket has an internal magnetic strip that helps keep the seal tight against the steel face of the refrigerator. Installation requires no tools. This is the basic process:read more

evaporator coil kept freezing up, refridgerator warm.

  • Customer: Greg from Hanover Township, PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 166 of 180 people found this instruction helpful
This was the second part I tried. The defrost timer was first, but that did not fix it. To do this I had to remove the ice maker and the back plate of the freezer. Then I defrosted the coil and cut the wires. stripped them back and installed the new thermostat. re-assembled and tested. has been working great ever since. read more

Refrigerator would not run but interior light was on.

  • Customer: Bruce from Alton, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 155 of 202 people found this instruction helpful
I unplugged the refrigerator, then opened the door and removed four screws holding the plastic electrical panel to the interior top of the main refrigerator compartment and noticed the cold control was corroded badly, apparently from moisture in the panel. I ordered a new one from partselect.com. When it arrived the next day, I then pulled off the control ... read more