250P - Overview

Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber. You may need to replace the...Read more Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly. Customers rate this repair as Easy.

This Nut is a genuine replacement part for hundreds of models of chainsaws. It is made of durable yellow plastic and is sold individually. This Nut is part of the chain tensioner and works with the tension screw to allow the user to tighten or loosen the chain. This part will become worn over time and should be replaced if you notice an...Read morey signs of wear or damage. If you cannot adjust the bar when you turn the tension nut/screw, it usually means that this Nut is worn or damaged. You will need a screwdriver, a socket set, and a wrench set to complete this repair. Customers rate this repair as Easy.

This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article an...Read mored video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This is an authentic OEM sourced replacement part designed for use with Husqvarna chainsaws. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged. This part is made out of metal and it is sold individually. To complete this repair you would need a screwdriver.

It is an authentic OEM sourced part that is specially designed for Husqvarna chainsaws. This replacement screw is an important component of the chain tension mechanism that allows user to easily adjust tension of the chain by turning the screw. If the chainsaw bar doesn't adjust when you turn the tension screw usually either the screw or ...Read morethe pawl is worn or damaged. Please note one durable metal tension screw is included per order. Replacing this part is a simple task that should only require a screwdriver set.

Primarily used in chainsaws, this Starter Rope is an exact replacement part for hundreds of models. It is white and sold individually, not as part of a kit or assembly. The Starter Rope will need to be replaced once you notice signs of it fraying, wearing, or it breaks off. Customers rate this repair as Easy.

This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 threa...Read mored and 1.25?mm pitch, replacing a worn or missing nut helps maintain stability and dependable performance.

The repair kit diaphragm is an essential replacement part designed to keep your outdoor power equipment operating at its best. Built to work seamlessly within the carburetor system, this component helps regulate fuel flow for consistent engine performance and reliable starting. Its precision construction ensures a secure fit and long-last...Read moreing durability, reducing the risk of engine issues caused by wear or damage. Replacing a worn diaphragm with this high-quality kit restores efficiency and helps extend the life of your equipment, so you can tackle lawn care and outdoor projects with confidence.

This screw is an authentic OEM part which made for Husqvarna chainsaws. It is designed for multiple uses based on your tool. Please refer to diagrams for correct location and applied use of this screw. It includes one (1) metal screw per order. This is a hex head item so you would need a hex key/allen wrench to install or remove it.

This is an original replacement part manufactured for use with trimmers. The start/stop switch is also called the kill switch, and fits on the upper handle above the throttle. The red switch is used to shut of the engine, and has to be engaged to run the engine. The switch is sold individually.

This is a genuine Husqvarna and Jonsered replacement part that has been sourced from the original manufacturer to be used with chainsaws, brushcutters, stump grinders, pruning saws, and power cutters. The sealing ring is used to provide spacing and to prevent oil leaks between the drive shaft and the cover panel. This item is sold as an individual replacement part.

This replacement hardware is an authentic OEM sourced item, it is not an aftermarket imitation. It is commonly utilized on Husqvarna and Poulan chainsaws. This screw has multiple applications depending on the equipment. Please make sure to check appropriate diagrams for correct location and use of this hardware. One hex socket head screw is included per order.