24AA5DMK065 (2007) Bolens Log Splitter - Overview

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn and Garden Equipment. This screw has different applications depending on your equipment. This item is made out of Metal and is Sold Individually. Requires a Wrench to tighten or loosen.

This Air Cleaner Kit is an OEM part direct from MTD for use in a walk-behind lawnmower. The purpose of the air cleaner is to keep dust and debris from entering the carburetor and engine. This kit includes one paper filter and one foam filter. The paper filter cannot be cleaned and needs to be replaced once a year. The foam filter can be c...Read moreleaned by using liquid detergent and water, replace the foam element when damaged. Never run the engine without the filters as this can result in rapid engine wear.

This OEM-sourced interlock switch is a safety feature in your lawn equipment, designed to prevent accidents and injuries by stopping the machine from running if specific conditions are not met, such as when your foot is not pressing on the brake. It is typically located near the control panel, handle, or seat of the lawn mower. A faulty s...Read morewitch will cause the mower to fail starting, shut off when you are engaging the blades, or continue running without activating the safety features. Before replacing the switch, make sure the lawn mower is unplugged from its power source. Consult the user guide for instructions on accessing the switch. You may need a wrench or screwdriver to remove other components from the machine. Once you have located the switch, disconnect any wires and remove any fasteners holding it in place. Please note that this replacement part is sold individually.

This fuel cap is a replacement part sourced directly from the original equipment manufacturer. It is not an aftermarket part. This cap is commonly used in lawn mowers made by MTD, Bolens, and Yard Man. It is made of plastic, and it\'s purpose is to prevent fuel from spilling outside the fuel tank. This cap is sold individually, and it requires no tools to replace.

This is a genuine replacement part manufactured for use with outdoor power equipment. The screw includes a lock washer and is commonly used to secure the motor to the frame. This screw has various applications based on the model of the machine it is used with. The screw is sold as an individual replacement part, please see model diagram for part location and usage.

This recoil starter assembly is a high quality item that is specially designed for use with lawn and garden equipment. This part allows user to easily pull-start the engine. It is a complete assembly which includes a plastic shroud, starter pulley, starter spring, grip and the pull rope. Please note the hardware to secure this recoil assembly is sold separately.

This is available as an individual replacement part. The front wheel goes next to the lever & knob and the pivot arm. A socket set and an adjustable wrench may be helpful when replacing this item. It is made out of plastic and will require replacing if it breaks. This is a Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard Man replacement part directly sourced from the manufacturer for use in lawn mowers.

The Push Cap Rod is a 1/2-inch metal metal cap which can be easily installed with a hammer and pliers. This manufacturer certified part comes in silver and is made of metal. This cap attaches onto an axle to help the wheel stay attached. If broken, the wheel will fall off and the part should be replaced.