Models > 2418H

2418H Simplicity Lawn Mower - Overview

Sections of the 2418H

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Seal--Oil (PTO Side) – Part Number: 795387
Seal--Oil (PTO Side)
★★★★★
★★★★★
(2)
PartSelect #: PS9151828
Manufacturer #: 795387
This OEM Seal-Oil (PTO Side), also called the Oil Seal, is a Black, Nitrile Rubber, 2/14 O.D., individually sold part which is installed using a Seal Puller. Customers rate the installation difficulty...
$7.88
  In Stock
Gasket Set-Valve – Part Number: 794152
Gasket Set-Valve
★★★★★
★★★★★
(1)
PartSelect #: PS9141388
Manufacturer #: 794152
$31.69
  On Order
Seal,Oil – Part Number: 391086S
Seal,Oil
PartSelect #: PS9277860
Manufacturer #: 391086S
The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "M...
$6.59
  In Stock
Gasket--Exhaust – Part Number: 692236
Gasket--Exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$5.71
  In Stock
Seal-O Ring – Part Number: 691917
Seal-O Ring
★★★★★
★★★★★
(1)
PartSelect #: PS9294749
Manufacturer #: 691917
The Seal-O Ring, also known as the gasket, is red in color, made of rubber, and is an OEM part that requires some skill to replace. This part is designed to create a seal between the carburator and ma...
$4.99
  In Stock
Pump-Fuel – Part Number: 808656
Pump-Fuel
★★★★★
★★★★★
(1)
PartSelect #: PS9154486
Manufacturer #: 808656
$113.45
  On Order
Gasket-Float Bowl – Part Number: 281165S
Gasket-Float Bowl
★★★★★
★★★★★
(1)
PartSelect #: PS8945656
Manufacturer #: 281165S
$5.60
  In Stock
Tube--Breather – Part Number: 794683
Tube--Breather
PartSelect #: PS9306838
Manufacturer #: 794683
$8.01
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Fan-Flywheel – Part Number: 796201
Fan-Flywheel
★★★★★
★★★★★
(6)
PartSelect #: PS9306896
Manufacturer #: 796201
$29.29
  In Stock
Fuel Filter – Part Number: 394358B
Fuel Filter
PartSelect #: PS17016257
Manufacturer #: 394358B
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. ...
$3.99
  In Stock
Filter-Oil – Part Number: 492932S
Filter-Oil
PartSelect #: PS8982169
Manufacturer #: 492932S
$13.07
  In Stock

Questions And Answers for 2418H

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My Briggs & Strattan (Troy Bilt) riding mover had broken vanes(blades) on the engine.
I went to Troy-Bilt first first for the part-nothing, then B&S engine, still no help surfing their websites for this part. Again, no help. Before giving up completely I thought about all the parts I have bought from PartSelect for washers and such. Typed in "Fan-Flywheel" B&S. First thing that popped up was a picture of this part. All my searching on Troy-Bilt mower site and B&S site for over two hours with no results, and then I go to PartSelect and without my model number or anything else, they had it and even displayed my model number and sent it right away, popped it in and the mower is working fine as ever. No matter what you need, I say save yourself a lot of time and just go here first. I'm a loyal member of PartSelect for over six years!!!
Parts Used:
Fan-Flywheel
  • William from SPRING GREEN, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mower with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Parts Used:
Tube--Breather
  • Emanuel from FERRIDAY, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!