240E Husqvarna - Overview
Models starting with 240E
Click on the best match to narrow your results.
- 240E ( 20100100001-20102300000 2010 ) Husqvarna Chainsaw (240 E Triobrake, 20100100001-20102300000)
- 240E (TRIOBRAKE) Husqvarna Chainsaw (240 E Triobrake)
- 240E Husqvarna Chainsaw (240 E)
- 240E ( 20102300001-Current 2010 ) Husqvarna Chainsaw (240 E Triobrake, 20102300001-Current)
- 240E (20091400001-20101400000) Husqvarna Chainsaw (240 E (20091400001-20101400000))
- 240E (20101400001-20144000000) Husqvarna Chainsaw (240 E (20101400001-20144000000))
- 240E ( TRIOBRAKE 20100100001-20102300000 ) Husqvarna Chainsaw (240 E Triobrake (20100100001-20102300000))
- 240E (240 E 2008-01) Husqvarna Chainsaw (Chainsaw)
- 240E (20080100001-20091400000) Husqvarna Chainsaw (240 E (20080100001-20091400000))
- 240E (20144000001-Current) Husqvarna Chainsaw (240 E (20144000001-Current))
- 240E ( TRIOBRAKE 20102300001-Current ) Husqvarna Chainsaw (240 E Triobrake (20102300001-Current))
- 240EPA (2001-01) Husqvarna Brush Cutter (Brushcutter)
- 240EPA (2002-08) Husqvarna Brush Cutter (240 Epa (2002-08))
- 240ETRIOBRAKE (2010-01) Husqvarna Chainsaw (Chain Saw)
- 240ETRIOBRAKE (2010-06) Husqvarna Chainsaw (Chain Saw)
Keep searches simple, eg. "belt" or "pump".
Engine Fuel Filter
PartSelect #: PS9285148
Manufacturer #: 530095646
This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this esse...
$9.16
In Stock
Purge Line
PartSelect #: PS9008180
Manufacturer #: 530069216
This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the car...
$18.34
In Stock
Fuel Line Fitting
PartSelect #: PS9003834
Manufacturer #: 530023877
The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "E...
$7.63
In Stock
Starter Recoil Spring
PartSelect #: PS9030463
Manufacturer #: 545008013
Also referred to as a Recoil Spring, this OEM replacement part is used to rewind the pull rope back into the starter housing. This Spring is sold individually, not as part of a kit or assembly, and is...
$10.89
In Stock
Nut
PartSelect #: PS9004113
Manufacturer #: 530015917
The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.
$6.40
In Stock
Spark Plug
PartSelect #: PS8996057
Manufacturer #: 503235111
Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not p...
$9.16
In Stock
PIN, BAR ADJUSTING
PartSelect #: PS9289242
Manufacturer #: 545060502
It is an authentic manufacturer-sourced part which is specially made for Poulan and Husqvarna chainsaws. The part is utilized on a chainsaw to to adjust the blade to the correct tension. A correctly a...
$6.40
In Stock
Chain Catcher
PartSelect #: PS9004067
Manufacturer #: 530029850
This is a genuine manufacturer approved replacement part designed for use with chainsaws. This part is an important safety feature because it prevents the chainsaw chain from flying off the bar if it ...
$9.16
In Stock
Adjust Pin-Bar 36/41
PartSelect #: PS9003373
Manufacturer #: 530015826
This Bar Pin Adjuster is an OEM part used to adjust the tension on the bar, which loosens or tightens the chain. It attaches to the slot in the bar, and the chainsaw bar adjusting screw. Installation ...
$7.63
In Stock
Recoil Starter Repair Kit
PartSelect #: PS9005221
Manufacturer #: 530071966
This is an authentic OEM part for use with Craftsman Chainsaws. The recoil starter repair kit replaces the parts of the engine\\\'s recoil starter susceptible to normal wear. The most common reason fo...
$27.52
In Stock
Clutch Drum
PartSelect #: PS9007596
Manufacturer #: 530047061
This is a genuine OEM sourced component which is specially made for Poulan and Husqvarna chainsaws. The are two functions of the clutch drum assembly. It encases the clutch and when the engine gets up...
$27.52
In Stock
Common Symptoms of models starting with 240E
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The metal band that tightens on the "flywheel" had broken.
I looked at just buying the metal band for about $5. But I noted it would have required having to compress a spring in a very small area. Since my saw is over 5 years old I figured I might as well get the whole chain brake assembly which includes the cover, and all the guts that are in that cover. This included the metal band and the s
... Read more
pring already installed. I think my time is worth something and not being frustrated with getting all the parts back in place was worth the extra $15. As far as the actual work this is how it went. Remove two large nuts on side of saw. Remove damaged cover. Put on new cover. Tighten 2 nuts. Adjust tension of chain. Only trick would be to check that the chain brake lever is not in the forward position (where it would stop the chain from turning). It should be in the back position (towards the top handle) to put back on the cover. Love this saw by the way for cutting small trees for firewood.
Read less
Parts Used:
-
Heidi from Lincoln, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced pin bar adjuster
A very simple fix once I rec'd the part. Took old broken part off bolt and screwed new one on. Great to get saw back in ready for use status.
Parts Used:
-
Timothy from TRYON, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part not same
Ordered on/off switch. My switch had only one wire terminal. Replacement had two. I ran a wire from one to a screw as a ground. Switch worked fine.
Parts Used:
-
Bruce from ALGOMA, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
4 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!