Models > 240464

240464 Husqvarna Lawn Mower - Overview

Sections of the 240464

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Bearing – Part Number: 532009040
Bearing
★★★★★
★★★★★
(1)
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$6.36
  In Stock
Order within the next 6 hrs and your part ships today!
Washer Head Screw – Part Number: 584953901
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.81
  In Stock
Order within the next 6 hrs and your part ships today!
Ring Klip Number T5304-75 – Part Number: 812000029
Ring Klip Number T5304-75
★★★★★
★★★★★
(1)
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It i...
$3.81
  In Stock
Order within the next 6 hrs and your part ships today!
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
★★★★★
★★★★★
(2)
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.81
  In Stock
Order within the next 6 hrs and your part ships today!
Cap Axle Black 1 50 x 1 00 – Part Number: 532104757
Cap Axle Black 1 50 x 1 00
★★★★★
★★★★★
(1)
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$3.81
  In Stock
Order within the next 6 hrs and your part ships today!
Blade Mower Hi Lift – Part Number: 532405380
Blade Mower Hi Lift
★★★★★
★★★★★
(1)
PartSelect #: PS9017804
Manufacturer #: 532405380
$22.94
  In Stock
Order within the next 6 hrs and your part ships today!
V-Belt-Drive – Part Number: 532130969
V-Belt-Drive
★★★★★
★★★★★
(1)
PartSelect #: PS9009376
Manufacturer #: 532130969
$31.86
  In Stock
Order within the next 6 hrs and your part ships today!
Ground Drive Fixed Idler Pulley – Part Number: 532194326
Ground Drive Fixed Idler Pulley
PartSelect #: PS9016377
Manufacturer #: 532194326
This ground drive fixed idler pulley is for lawn tractors. 910 inch offset Ground drive fixed idler pulley helps apply tension to the drive belt, allowing the belt to turn. Wear work gloves to...
$14.02
  In Stock
Order within the next 6 hrs and your part ships today!
Bolt and Washer Assembly – Part Number: 532193003
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
$8.91
  In Stock
Order within the next 6 hrs and your part ships today!
Pulley Idler Flat – Part Number: 532194327
Pulley Idler Flat
PartSelect #: PS9016399
Manufacturer #: 532194327
$14.02
  In Stock
Order within the next 6 hrs and your part ships today!
Washer Hardened – Part Number: 532188967
Washer Hardened
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$5.09
  In Stock
Order within the next 6 hrs and your part ships today!
Switch-Ign – Part Number: 532193350
Switch-Ign
★★★★★
★★★★★
(2)
PartSelect #: PS9020864
Manufacturer #: 532193350
$14.02
  In Stock
Order within the next 6 hrs and your part ships today!

Questions And Answers for 240464

Be the first to ask our experts a question about this model!

Common Symptoms of the 240464

[Viewing 2 of 2]
Drive system does not work
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it functions properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Parts Used:
V-Belt-Drive
  • Lynn from BOILING SPGS, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Parts Used:
Ring Klip Number T5304-75 Cap Axle Black 1 50 x 1 00
  • Anthony from OLIVEHILL, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lound deck noise when mower put into motion
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut came off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Parts Used:
Pulley
  • Steven from Hickory, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set, Wrench set
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!