228F195 Coleman Lighting - Overview

Genuine Coleman replacement part, it is sold individually. This part keeps the lantern pressurized. Includes: Plunger, spring clip, metal cap, spring, and clip. Installation is fairly easy, requiring needle-nose pliers, oil, and a flat-head screwdriver, or similar tool, to pry to the spring clip off of the pump. Compatible with the Coleman lanterns shown below.

This is a genuine OEM sourced replacement part for Coleman lanterns or stoves. It acts as a spacer and a seal for the valve stem. This item is made out of graphite and it is sold individually. Please note it does not include valve stem or a wheel.

This genuine manufacturer-sourced check valve assembly is designed for use with select Coleman lanterns and stoves. Made of durable brass, the assembly includes both the check valve and the air stem. The air stem threads into the check valve and is operated using the hollow pump shaft. When turned counter-clockwise, it opens the valve to ...Read moreallow air to pass through, regulated by the internal check ball. When turned fully clockwise, it securely closes the valve. This OEM part is sold as a complete unit and is essential for maintaining proper pressure control in compatible Coleman fuel systems.

This is a Genuine Manufacturer Sourced replacement part used on some Coleman Gas Lanterns. This part is made out of Clear Glass, and it is sold individually. The spare lantern globe can be installed safely and easily with no additional tools.

Genuine Coleman replacement part, This pack contains four Mantles. The Mantle is the part of the Lanterns shown below, that generates bright white light when heated by flame. The Mantle is made of woven fabric with other material as part of them. Once a Mantle is prepared for use, it becomes very brittle. For this reason it is advised to keep some extra Mantles on hand at all times.

This is an Original Manufacturer Sourced replacement part used on some Coleman Gas Lanterns. Generator includes new gas tip, spring, and tip cleaning wire. If the lantern lights for a few seconds then goes out and there is no sound of air passing through the generator, there is either no pressure in the fuel tank or the generator is clogged.

This genuine Coleman replacement part is designed for use with select lanterns and stoves. Made from high-quality leather, this pump cup fits securely at the end of the pump plunger, creating an airtight seal that’s essential for proper pressure buildup and reliable operation. Over time, leather pump cups can dry out, crack, or harden,...Read more which can reduce performance or prevent your equipment from functioning altogether. If you notice difficulty building pressure or visible wear on the cup, it’s time for a replacement. This part is sold individually and installs easily—no tools required. For best results, keep the leather lightly oiled to maintain flexibility and extend its lifespan.

This is a manufacturer-sourced replacement part designed for fuel tanks used with Coleman heaters and lanterns. This filler cap covers a valve opening on the tank that is found as part # 424-5601. This metal part is sold individually.

This is an authentic Coleman-made assembly used with lanterns. Included is one each of metal bail handle and ceramic-coated metal ventilator. The bail handle hooks into pre-drilled holes on the sides of the ventilator. Then the ventilator is set onto the screw on top of the burner assembly, and is held into place when the ball nut is twisted down onto the screw.

This is a genuine Coleman replacement part used with lanterns. This assembly includes the fount, which is also called a fuel tank. This assembly holds the liquid fuel while also acting as the mechanism that pressurizes it and sends it into the generator and burner. In Addition to the Fount Itself, This Assembly Includes the Following Par...Read morets: • Filler Cap, Part Number: 3000000454 • Pump Plunger, Part Number: 242J5201 • Check Valve & Air Stem, Part Number: 200-6381 • Fuel Tube Assembly, Part Number: 220D1461 • Stem Assembly, Part Number: 220C6531

This is a genuine Coleman replacement part used with lantern pumps. It is a small metal piece that is designed to hold the pump in place on the fuel tank. To install, slide the pump into place and align the two small holes on the pump with the holes in the tank; fit the clips through the holes to lock everything into place. This part is sold individually, and is usually included with the plunger assembly.