2251298 Weber Grill - Overview

This is an authentic Weber replacement part that has been sourced from the original manufacturer to be used with natural gas grills. The brass coupler is used to connect the fuel hose to the natural gas supply. This quick disconnect is sold as an individual replacement part, tools may not be needed to install this item.

This is a genuine Weber replacement part that is specially designed for use with gas grills. This bottom tray will catch the grease drippings providing and easy way to keep your grill clean and ready for service. This is a black porcelain enameled steel tray that is sold individually.

This Weber logo is an original replacement part supplied directly from the manufacturer. It is compatible with 150+ models of Weber grills. This logo is placed on the lid of the grill. Replacing this logo will keep your machinery looking pristine. Two fasteners are included with this part.

This is a Genuine Manufacturer Sourced replacement part used on a variety of Weber Grills. This is a Metal (Aluminum) assembly used to prevent drippings and food particles from marring your deck or patio.

This is an authentic OEM sourced replacement part designed for use with Weber grills. These rails are used to hold the grease/drip funnel tray to the underside of the grill so you can slide the tray in and out for easy cleaning. This set includes two (2) aluminum bottom tray rails with four (4) screws used to mount rails. To complete this repair you will need a screwdriver.

This is a genuine Weber replacement part manufactured for outdoor gas grills. The metal tray rails support the drip pan, and each rail will mount using one screw. This bottom tray rail set will come with two screws, and two rails. The sets are sold individually.

This is an authentic kit made for the lid on Weber grills. This is a 14-part set that includes two posts, two retaining clips, and ten hex nuts. The posts are used to secure the lid to the body of the grill while allowing it to swing freely as a hinge. The ends of the posts have small holes that the retaining clips slide into to keep them in place.

This is an original Weber part manufactured for use with outdoor grills. The control panel plugs with screws fasten the control panel to the side frame. Only two plugs are required to secure the control panel, and this set will include both plugs, and two screws, please note the set is sold individually.

This is a Genuine Weber replacement part designed for their Grills. Kit includes: push-button igniter, gas-catcher ignition chamber, white wire, black wire, and instruction sheet. Hassle-free installation enabled by easy-to-follow instructional guide

This is a genuine OEM assembly sourced directly from the original manufacturer. It is used with Weber propane grills. This part includes a regulator and flexible hose that control the flow of fuel to the manifold. A manifold takes gas from one inlet source and directs it to multiple outlets. The gas then travels to the burners. This part includes ten hardware pieces used for this assembly's installation.

This crossover tube is a genuine Weber replacement part, not an aftermarket imitation. It is sourced directly from original equipment manufacturer The purpose of this tube is to allow gas to flow from one burner to another. They also help to provide extra support for the burners. This stainless steel crossover tube is sold individually.