225 (233643) Graco Sprayer - Overview

This genuine item is supplied directly from the original equipment manufacturer for use with Graco paint sprayers. The o-ring fits between the housing and the filter and is made out of plastic. During the installation process, a screwdriver may be needed. This is available as an individual replacement part.

This is a genuine OEM sourced part which is specially designed for use with Graco sprayers. It is an identical replacement for a missing or a faulty threaded deflector that was included with a new unit, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of thi...Read mores component. Keep in mind this high-quality item is made of durable material and is sold individually.

This is the return hose assembly, or return line, which is designed for various models of airless paint sprayers and is sold as an individual part. The return line is designed to allow paint and pressure to be returned into the reservoir, and simultaneously connected to a specific port on the sprayer for a continuous paint cycle. This ret...Read moreurn line is comprised of a high-quality rubber and metal pump attachment at one end and a metal tube and plastic reservoir attachment at the other end. Depending on your model, you may need a set of pliers or a wrench to disconnect and remove the old line. Before you replace your old line, it is recommended that you wrap the metal end of the line with Teflon tape to create the best seal possible. When replacing the line, disconnect the sprayer from power and release any pressure in the spray gun by squeezing it until no more pressure is felt.

The OEM Gasket is a grey foam part used to provide a seal between two joining pieces. If broken, there will be a leak and the part should be replaced. Refer to your make, model and diagram to check if this is the correct part for you.

This is an authentic manufacturer-sourced component which is specially designed for use with Graco sprayers. It is an identical replacement for a missing or a faulty packing that was installed on a new unit. The purpose of this part is to provide a tight seal between connected components. Please make sure to refer to the appropriate diagr...Read moreams of your model for the correct location and application of this hardware. Keep in mind this high-quality packing is made of durable rubber and is sold individually.

This replacement gear case insulator is supplied directly from the original equipment manufacturer for use with Graco sprayers. It is an identical substitution for a worn or missing filter that helps to remove the dust and other harmful contaminants from the material. Please make sure to refer to the owners manual for the correct applicat...Read moreion of this component. Keep in mind this high-quality 60 mesh filter is made of durable material and is sold individually.