210-405-118 (1990) MTD Tiller - Overview

Lawn Mower Ground Drive Belt

★★★★★

★★★★★

(1)

3/8 x 36-1/8-inch This ground drive belt (part number 954-04032B) is for lawn mowers. Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels. Wear work glov... Add to cart

TT Screw 1/4-20 x 0.5 Add to cart

Bearing The flange sleeve bearing, also known just as the bearing, is sold individually, and assists the tine shaft rotation on your tiller by reducing friction between the moving parts and securing their pos... Add to cart

Throttle Box Ass'y

★★★★★

★★★★★

(2)

The Throttle Box Assembly, or the Throttle Assembly, is a kit that includes the housing, handle, and hardware. It is black and constructed of steel and plastic. It can be installed onto the right hand... Add to cart

Dust Cap This OEM dust cap prevents dust from entering the shaft and surrounding area of your tiller. This part is black, sold individually, and made out of plastic. Due to damage from ongoing use, this part c... Add to cart

Seal The bearing seal, also known simply as the seal, is a special seal for the bearings in your tiller. It attaches in the tiller housing, with the bearing and shaft, and over time it can become damaged d... Add to cart

Jamlock Nut, 3/8-16 The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace... Add to cart

Clutch Control Cable

★★★★★

★★★★★

(1)

This clutch control cable is an OEM part made to be used with your garden tiller. Its function is to engage the clutch in order to drive the tiller. This part is black and silver in color, composed of... Add to cart

Bearing .62" I.D. x 1.38" O.D. x .437" Thk. This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised ... Add to cart

Throttle Cable

★★★★★

★★★★★

(1)

Add to cart

Fl-Wash 1.00" X 1.63" O.D. X 03 This Flat Washer helps to spread load under a nut or bolt in a wide variety of lawn and garden equipment. Its dimensions are 1.00 inches x 1.63 inches O.D. x 03. This part is silver and made of metal,... Add to cart

Washer-Lock 5/16 This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ... Add to cart