1NNE7 Campbell Hausfeld Compressor - Overview

This replacement regulator/manifold manifold assembly is specially manufactured for Campbell Hausfeld air compressors. The manifold kit consists of the manifold, the regulator, two pressure gauges, two quick-disconnects, and the nipple that connects the entire assembly to the air tank. The manifold kit will solve any problems related to a...Read more cracked manifold assembly, as well as any problems with the regulator. To complete this repair job correctly you may need : Phillip's screwdriver, hex drivers, long-nosed pliers, wrenches and heavy-duty wire cutters. • Depressurize the tank • Remove the manifold cover • Remove the pressure hose • Remove the pump assembly from the tank • Remove the manifold • Remove the manifold nipple • Transfer the safety valve • Install the new manifold kit • Secure the the pump assembly • Reinstall the hose • Reattach the manifold cover • Ensure everything is connected and test the compressor

This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not shut off at the proper setting. This important component is sold individually. A screwdriver, adjustable wrench and a pair of pliers are of...Read moreten necessary for the removal and replacement. Please refer to the specific manual for additional repair information.

This is a genuine Campbell Hausfeld replacement part. The gauge is designed by the manufacturer for use in air compressors. This is a complete assembly made primarily of high-quality plastic and metal, and it is placed in the pressure switch to monitor the pressure within the tank. This part is sold individually.

This is an authentic Campbell Hausfeld replacement part. The smart start air filter is designed by the manufacturer for use in compressors. This part is a complete assembly, which is attached to the pump and motor to remove dust and debris from the air. You may require a wrench when replacing this part. This item is sold individually.

This is a genuine Campbell Hausfeld replacement part that is sourced from the original manufacturer to be used with air compressors. The metal foot screw is commonly used to secure the rubber foot to the bottom of the machine's frame. The screw is sold individually, please note four screws may be required.

This is an authentic Campbell Hausfeld replacement part that has been sourced from the original manufacturer to be used with air compressors. The metal screw is used to secure the cover that protects the motor and pump assembly. This item is available as an individual replacement part.

This molded rubber foot fits select air compressors. It measures 1 1/2 inches across and 3/4 inch high. The foot helps steady the compressor, reduce vibration and noise, and protect the floor from scratches. Replace it if the rubber is cracked, flattened, torn, or missing. Use the complete compressor model and serial number to guarantee t...Read morehe proper fit. Check the product listing to confirm the quantity and whether mounting hardware is included. Unplug the compressor and release all tank pressure before repair.