1J501-1N1 General Electric Range - Overview

Diagrams for 1J501-1N1

See every part. Know exactly what you need.

Parts for the 1J501-1N1

$45.29

Bake Element

★★★★★

(28)

Part #WB44X5099

This closed hinged-style bake element has screw in terminals.

$94.16

Silicone Door Gasket

★★★★★

(1)

Part #WB2X1522

This gasket seals the range/oven door.

Thermostat

Part #WB21X5209

The length of this thermostat's capillary is 62 inches.

Broil Element

Part #WB45X56

DISCONTINUED

Part #WB24X74

Common Symptoms of the 1J501-1N1

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Oven not heating evenly

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The lower bake element burned out.

67 of 72 people found this instruction helpful.

Carlos from Southaven, MS
Really Easy
Less than 15 mins
Nutdriver

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!

It worked. What was really cool, once I ordered the part, I received it in only two work days!

Goo ... Read more

Read less

Was this helpful?

Replaced lower element in GE Spectra range.

22 of 31 people found this instruction helpful.

Phillip from Greeneville, TN
Really Easy
Less than 15 mins
Nutdriver

Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins!

Was this helpful?

Old element burned through. Sparks were flying!

19 of 26 people found this instruction helpful.

David from Baton Rouge, LA
Really Easy
Less than 15 mins
Screw drivers

Turned off power at breaker panel. Removed 2 screws attaching element to stove. Pulled element out a couple of inches and removed 2 wires attached with screws. Installation is reverse order of removal.
Be careful not to twist the terminal ends when tightening screws.

shipping was very fast!

Was this helpful?