19Y129 Graco Paint Sprayer - Overview

This OEM pneumatic wheel is connected to the frame or base of your sprayer, providing easy transportation over rough or uneven surfaces. This wheel is an 11-inch rubber tire on a 4 inch-rim filled with air and is mounted on a hub or axle. To identify a broken wheel, look for signs such as deflation, wobbling, or excessive wear and cracks....Read more Operating your sprayer may become challenging, and the paint application could become uneven. To replace a wheel, use a wrench or pliers to remove the axle cap or nut securing the wheel assembly. Afterwards, you can slide the wheel off the axle. Please note that this replacement part is sold individually, and it is recommended to replace all your wheels at once for optimal performance.

This is a genuine OEM sourced part which is specially designed for use with Graco sprayers. It is an identical replacement for a missing or a faulty threaded deflector that was included with a new unit, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of thi...Read mores component. Keep in mind this high-quality item is made of durable material and is sold individually.

This is an authentic Graco replacement part, sourced from the original manufacturer for use with paint sprayers. The special motor shield is commonly used to house the sprayer's electric motor. This motor shield is available as an individual replacement part, please see model diagram for associative parts.

This authentic OEM fluid filter manifold assembly acts as the main filter block for the manifold filter in your paint sprayer, ensuring that impurities are removed from the paint before it reaches the spray gun so that the debris does not affect your finish quality, damage your sprayer, or clog your spray tips. To check if it is broken, l...Read moreook for leaks or visible damage. Unfiltered impurities can cause clogs and blockages, leading to uneven or flawed paint application. To replace the assembly, first, set the pressure control knob to the lowest setting, turn off the machine, and disconnect it from the power source. Consult your user manual to locate the assembly, which is typically near the fluid inlet connection. Use a socket or wrench set to remove the components connected to the manifold assembly, including hoses, the transducer, the nipple, and the dump valve assembly. Unscrew the cap and remove the filter from the assembly. Please note that the replacement part is sold separately from the cap, insert, or filter.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Graco sprayers. The filter helps to ensure that the material that goes through the unit is free of dust and other harmful contaminants. Please make sure to refer to the owners manual of your model for the correct location and application of this component. Keep in mind this high-quality filter is sold individually.

This drain hose repair kit is designed for airless paint sprayers to restore proper priming and pressure relief operation. By replacing worn or damaged drain hose components, it helps ensure smooth pressure management and reliable sprayer performance. Built from durable materials, it’s a practical maintenance solution for keeping professional paint equipment operating efficiently.

This transducer is sourced from the original manufacturer for use in paint sprayers. The transducer, also known as a pressure transducer or pressure sensor, is responsible for monitoring and measuring the pressure of the paint being sprayed. The transducer then relays this information to the control system which allows the sprayer to rema...Read morein in the desired spray parameters and prevent over pressurization. Transducers can fail due to electrical issues, or mechanical damage, which can cause inaccurate pressure readings, loss of control, inconsistent spray patterns, poor paint application and fluctuating pressure rates. To remove a faulty transducer first, disconnect the electrical wires and fasteners holding it in place. Position the new transducer in the empty slot and reattach the electrical connections and any mounting hardware to complete your repair.

This is an OEM part direct from Graco. The metal screw is compatible with many paint sprayers, and is sold individually. This item is most often used to fasten the motor shield as well as securing other components of the sprayer. A wrench is needed for the proper installation.

O-rings are used within power equipment to create seals within valves and pipes to prevent leaks and ensure the best performance possible. This O-ring is designed for use within various models of paint sprayers, and sits in between the manifold and manifold cap filter, to ensure that paint is used effectively and does not leak. This O-rin...Read moreg is an individually-sold, genuine OEM part made of Teflon, which is a highly heat- and chemical-resistant, synthetic material. However, due to normal wear and tear, excessive pressure, or damage, Teflon O-rings can tear or break, needing to be replaced immediately. To avoid having to replace this O-ring in the future, make sure to follow any of the original equipment manufacturer standards for maintaining your paint sprayer, along with regular inspections, cleaning, and proper storage. To replace this O-ring, make sure your paint sprayer is turned off and any extra paint is released from the spray gun. Unthread the manifold cap and remove it and the attached filter, and the O-ring should be attached between to be easily replaced.