18748 (400000000 - 999999999) Toro Lawn Tractor - Overview

This is an authentic replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers from Toro and Lawn Boy. The shoulder screw is commonly used to secure the side fenders to the mower's frame assembly. This bolt is sold as an individual replacement part.

This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental or unauthorized use of the equipment. A broken key might be loose or hard to turn. In some cases, it might have completely fallen out of the...Read more switch. Without the ignition key, it will be difficult or impossible to start the engine. Locate your ignition key by reading your user manual. To remove a stuck ignition key, you may need to use a small amount of lubricant on it. While turning the key in the ignition switch, gently wriggle it back and forth. There may also be a release button that you could press, depending on your model type. This replacement part is an OEM product and is sold per unit.

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The Nut-Flange, Ni, simply known as a Flange Nut, is a silver metal individually sold part which can be applied with a wrench or socket and torque wrench. Simply torque the part to the manufacturer specifications. It is used to secure the idler arm assembly to the frame, and will need to be replaced if damaged. You can tell if it is brok...Read moreen if there are signs of visible damage, or the part won't tighten all the way due to damaged threads. Customers rated this repair as easy.

This is a genuine item that is supplied by the original equipment manufacturer for use with Hitachi nailers. It is an identical replacement for a missing or a faulty roller-scalp that was installed on a new unit, please make sure to refer to the appropriate diagram of your model for the correct location and application of this component. ...Read moreThis high-quality item is made of durable material and is sold individually, keep in mind the hardware to secure it is sold separately.

This is a genuine manufacturer-sourced component which is specially made for use with Toro snowthrowers. It is a standard hardware which may have multiple applications. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. Keep in mind it is a high-quality component is ...Read moremade of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This part is sold individually. The screw attaches to the chute and is made of metal. A wrench might be needed during the installation process. It will require replacing if it strips or breaks. This part is an OEM sourced directly from the manufacturer for use in Toro and Lawn Boy snowblowers.

This authentic item is supplied directly from the original equipment manufacturer for use with Toro lawn and garden equipment. It is an identical replacement for a missing or a faulty screw that was installed on a new unit. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagr...Read moreams of your model for the correct location and application of this component. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The valve is part of the tire assembly and is used to regulate tire pressure by allowing air into the tire and preventing air from escaping. This valve is available as an individual replacement part.

The thread forming screw attaches to the mower bumper. This part is an OEM from Toro and Lawn Boy for use in lawn mowers. This item is made of metal and is sold individually. A torx screwdriver will be necessary during the installation of this part. It will need to be replaced if it strips or breaks.