1816 - Overview

This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air fuel mixture by the spark. Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual. Over tim...Read moree a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors. It is better to replace a fouled spark plug, rather then trying to clean it.

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read mores specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

It is a genuine item that is supplied by the original equipment manufacturer for Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is a special component that provides a tight seal for the PTO side of the crankcase. Over time it may wear out and begin to crack eventually requiring a replacement...Read more. Check the appropriate diagrams for your specific model to ensure the correct installation of the new seal-oil. To perform this repair you will need a variety of tools such as a screwdriver, a wrench set, pliers and a tool to pick out the old seal. Make sure to drain the oil before starting this repair. Keep in mind, one durable rubber part is included.

Sold as a kit, including the metal body switch, a pair of keys, and the required hardware, this Ignition Switch Assembly has been sourced directly from the original manufacturer. If you are unable to start and stop your engine, you may need to replace the Ignition Switch Assembly. To complete this repair, you will need a screwdriver, a wrench set, and pliers. Customers rate this repair as Easy.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn mowers. This is an identical replacement for a missing or damaged housing-arbor top that was originally installed on a new unit, please make sure to check the appropriate diagrams and the owners manual f...Read moreor the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to be replaced if it becomes broken. A screwdriver, a set of pliers, and a wrench set may all be needed to help replace this part. This item is sold individually.

This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy-duty steel and engineered to apply even pulling force, it makes accessing the magneto, crankshaft key, or ignition system straightforward d...Read moreuring repairs or overhauls. Built to OEM specifications for durability and precise fit, it’s a reliable tool for maintaining lawn mowers, generators, and pressure washers with compatible engines.

Sourced directly from the original equipment manufacturer, this Spring Washer is used to spread the load under a bolt or nut. It has an I.D. of 0.475 inches, is made of metal, and is sold individually, not as part of a kit or assembly. If you notice any signs of corrosion, cupping, wear, or damage, you will need to replace the Spring Wa...Read moresher. Refer to your owner's manual to determine the exact location of this part on your model.

Introducing the starter solenoid from Simplicity specially designed to ensure your lawn tractor operates smoothly and efficiently. This solenoid plays a crucial role in sending battery current to the engine starter as you turn the ignition switch into the start position. Made from high-quality materials and crafted with careful attention ...Read moreto detail it serves as a durable and reliable addition to your lawn tractor machinery. Before installing remember to disconnect the battery and make sure to wear work gloves for your safety. This solenoid is included in a kit for your convenience. Trust Simplicity for all your lawn tractor parts needs.

It is an authentic manufacturer-sourced replacement part which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This filter helps to remove harmful contaminants from the engine oil, but over time it will get dirty and clogged eventually requiring a replacement to maintain peak...Read more performance. Keep in mind it is recommended to replace it at least once a season. Please note this high-quality component is sold individually.

This part is made of metal and is available as an individual replacement. The blade adapter fits between the washer shim and the retaining ring. An allen wrench may be required to replace this item if it becomes broken. This item is an original part from Snapper, Murray, and Simplicity for use in mower tractors.