17E845 Graco Paint Sprayer - Overview

This is an authentic Graco replacement part that has been sourced from the original manufacturer and is intended to be used with paint sprayers. The o-ring is used to seal the connection between the suction hose and the pump assembly. The o-ring is priced as a single item, please note two may be needed.

This is a genuine OEM approved replacement part designed for use with Graco paint sprayers. Due to heavy use or other factors, a cord can crack or become damaged. It is important to replace a damaged cord before continuing to use your equipment. This cord is made out of rubber and metal and is sold individually.

This is a genuine OEM sourced part which is specially designed for use with Graco sprayers. It is an identical replacement for a missing or a faulty threaded deflector that was included with a new unit, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of thi...Read mores component. Keep in mind this high-quality item is made of durable material and is sold individually.

This authentic OEM fluid filter manifold assembly acts as the main filter block for the manifold filter in your paint sprayer, ensuring that impurities are removed from the paint before it reaches the spray gun so that the debris does not affect your finish quality, damage your sprayer, or clog your spray tips. To check if it is broken, l...Read moreook for leaks or visible damage. Unfiltered impurities can cause clogs and blockages, leading to uneven or flawed paint application. To replace the assembly, first, set the pressure control knob to the lowest setting, turn off the machine, and disconnect it from the power source. Consult your user manual to locate the assembly, which is typically near the fluid inlet connection. Use a socket or wrench set to remove the components connected to the manifold assembly, including hoses, the transducer, the nipple, and the dump valve assembly. Unscrew the cap and remove the filter from the assembly. Please note that the replacement part is sold separately from the cap, insert, or filter.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Graco sprayers. The filter helps to ensure that the material that goes through the unit is free of dust and other harmful contaminants. Please make sure to refer to the owners manual of your model for the correct location and application of this component. Keep in mind this high-quality filter is sold individually.

This is an authentic Graco replacement part that has been sourced from the original manufacturer to be used with paint sprayers. The strainer attaches to the bottom of the pick-up hose assembly. The strainer is used to prevent debris from entering the pump assembly. This item is sold as an individual replacement part.

This is an authentic OEM part. The Graco switch is constructed of metal and plastic, and is made for use with many paint sprayers. This component is fitted onto the control box and wired to the control panel. The switch controls the power for many small, airless paint sprayers. A screwdriver and a wrench are helpful in making the replacement. The switch is sold individually.

This transducer is sourced from the original manufacturer for use in paint sprayers. The transducer, also known as a pressure transducer or pressure sensor, is responsible for monitoring and measuring the pressure of the paint being sprayed. The transducer then relays this information to the control system which allows the sprayer to rema...Read morein in the desired spray parameters and prevent over pressurization. Transducers can fail due to electrical issues, or mechanical damage, which can cause inaccurate pressure readings, loss of control, inconsistent spray patterns, poor paint application and fluctuating pressure rates. To remove a faulty transducer first, disconnect the electrical wires and fasteners holding it in place. Position the new transducer in the empty slot and reattach the electrical connections and any mounting hardware to complete your repair.

This is an OEM part direct from Graco. The metal screw is compatible with many paint sprayers, and is sold individually. This item is most often used to fasten the motor shield as well as securing other components of the sprayer. A wrench is needed for the proper installation.