1690982 Simplicity Snow Blower - Overview

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from Murray, Snapper, and Simplicity. The metal bolt is used with several different models of mowers and the application of the bolt can vary based on the individual equipment. It is recommended to review your model's illustr...Read moreated part list to determine the screw's usage and compatibility. This item is sold as an individual replacement part.

It is a genuine OEM sourced part that is specially produced for use with Murray and Snapper lawn and garden equipment. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. This high-quality carriage ...Read morebolt is made of durable metal and is sold individually, keep in mind the washer and other parts are all sold separately.

This is a genuine replacement part sourced directly from the manufacturer. The screw is commonly found in lawn tractors from Murray and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts d...Read moreiagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

Knob-int thr .312-18

This roll pin is designed to secure the grip height adjustment lever to the lift lever of your lawn mower or tractor. Over time, it can become damaged, or may need to be replaced if you are also replacing the handle. This part is dark gray in color, sold individually, and is made of metal. It is a repair that customers rated as easy; it...Read more requires a hammer and punch, and the new roll pin can be attached to the height adjustment lever handle.

Set screw

This is a genuine replacement part sourced from the original manufacturer for use with lawnmowers. The metal washer is commonly used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This washer is used with several different models of lawnmowers, and the application of the washer can vary based on the model of mower.