1690902 Simplicity Snow Blower - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

Key-ignition indak

This is a genuine replacement part sourced from the original manufacturer for use with snowthrowers and lawnmowers. The special capscrew is used with several different models of equipment, and the application of the capscrew can vary based on the model of snowthrower or lawnmower. This capscrew is available as an individual replacement part, please see model diagram for associative parts.

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to th...Read moree appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

This Simplicity Decal is made of white and blue plastic, measures approximately 11 inches x 2 inches, is not part of a kit or assembly, and is sold individually. No tools are required to complete this repair. Simply clean the area and apply the decal. Customers rate this repair as Easy.

It is an authentic OEM part which is specially designed for Murray riding lawn mowers and garden tractors. This is one of the push nuts that help to secure the pivot rod. If your hardware is damaged or is missing, this will provide an identical replacement. Refer to the diagrams of your specific model for the exact location and the correc...Read moret installation of the new component. Keep in mind this high-quality nut is made of durable metal and is sold individually. Replacing it is a simple task that may only require pliers.

This is an OEM part sourced directly from the manufacturer. The screw is commonly found in snowblowers and snowthrowers from Craftsman. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to...Read more be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is available as an individual replacement part.

This is an authentic replacement part, sourced from the original manufacturer for use with outdoor power equipment. The special fuel cap is used to seal and cover the opening of the fuel tank assembly. This item is available as an individual replacement part, please see illustrated diagram for related parts.

Pushnut cap wshr 1/4

Washer nylon

Elbow w/screen-gas ta