1690527 Simplicity Lawn Tractor - Overview

This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to be replaced if it becomes broken. A screwdriver, a set of pliers, and a wrench set may all be needed to help replace this part. This item is sold individually.

Introducing the starter solenoid from Simplicity specially designed to ensure your lawn tractor operates smoothly and efficiently. This solenoid plays a crucial role in sending battery current to the engine starter as you turn the ignition switch into the start position. Made from high-quality materials and crafted with careful attention ...Read moreto detail it serves as a durable and reliable addition to your lawn tractor machinery. Before installing remember to disconnect the battery and make sure to wear work gloves for your safety. This solenoid is included in a kit for your convenience. Trust Simplicity for all your lawn tractor parts needs.

This is a genuine Simplicity replacement part used in compatible mowers and tractors. The relief bearing attaches to the wheel and is made of metal. If this part wears down it will need to be replaced and may require a set of pliers and a hammer during the installation. It is available as an individual replacement even though two may be needed.

Key-ignition indak

This external retaining ring is a type of fastener used to secure components in various models of tractors. It is a genuine OEM replacement part provided by the manufacturer, also known as an E-ring or circlip, which is responsible for exerting pressure against components prevent it from dislodging. The ring is a circular metal part with ...Read moreprotruding tabs or ears that can be gripped for easy removal or installation. If the retaining ring wears down or becomes damaged, it will cause the equipment parts to become unstable or fall off resulting in loss of functionality, and damage. Use retaining ring pliers to compress the ring and slide it out of its groove. Align the new ring with the groove and slide it in. Each external retaining ring is sold individually.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine Snapper replacement part, sourced directly from the manufacturer. The circuit breaker is commonly used in Snapper lawn and garden tractors. This part is made of metal with a plastic backing, and is used in the electrical system to shut down the device in case of electrical surge, protecting sensitive components. This item is sold individually.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is a genuine Snapper and Simplicity replacement part for use in lawn mowers, lawn tractors, and snowblowers. The key attaches to the disc and is made of metal. A set of pliers may be needed during the replacement of this part. It will need to be replaced if it breaks. This item is sold individually.

This Simplicity Decal is made of white and blue plastic, measures approximately 11 inches x 2 inches, is not part of a kit or assembly, and is sold individually. No tools are required to complete this repair. Simply clean the area and apply the decal. Customers rate this repair as Easy.